SN74LV164APWT
| Parameters | |
|---|---|
| Factory Lead Time | 6 Weeks |
| Lifecycle Status | ACTIVE (Last Updated: 1 day ago) |
| Mount | Surface Mount |
| Mounting Type | Surface Mount |
| Package / Case | 14-TSSOP (0.173, 4.40mm Width) |
| Number of Pins | 14 |
| Weight | 57.209338mg |
| Operating Temperature | -40°C~85°C |
| Packaging | Tape & Reel (TR) |
| Series | 74LV |
| JESD-609 Code | e4 |
| Pbfree Code | yes |
| Part Status | Active |
| Moisture Sensitivity Level (MSL) | 1 (Unlimited) |
| Number of Terminations | 14 |
| Termination | SMD/SMT |
| Terminal Finish | Nickel/Palladium/Gold (Ni/Pd/Au) |
| Additional Feature | AND-GATED SERIAL INPUTS (A AND B) |
| Packing Method | TR |
| Technology | CMOS |
| Voltage - Supply | 2V~5.5V |
| Terminal Position | DUAL |
| Terminal Form | GULL WING |
| Peak Reflow Temperature (Cel) | 260 |
| Supply Voltage | 2.5V |
| Frequency | 50MHz |
| Time@Peak Reflow Temperature-Max (s) | NOT SPECIFIED |
| Base Part Number | 74LV164 |
| Function | Serial to Parallel |
| Qualification Status | Not Qualified |
| Output Type | Push-Pull |
| Number of Elements | 1 |
| Supply Voltage-Max (Vsup) | 5.5V |
| Power Supplies | 2.5/5V |
| Supply Voltage-Min (Vsup) | 2V |
| Load Capacitance | 50pF |
| Propagation Delay | 11 ns |
| Family | LV/LV-A/LVX/H |
| Logic Function | Shift Register |
| Direction | Unidirectional |
| Logic Type | Shift Register |
| Output Polarity | TRUE |
| Max I(ol) | 0.05 A |
| Number of Bits per Element | 8 |
| Trigger Type | POSITIVE EDGE |
| Max Input Current | 20μA |
| Schmitt Trigger | No |
| Power Supply Current-Max (ICC) | 0.02mA |
| Number of Output Lines | 3 |
| Height | 1.2mm |
| Length | 5mm |
| Width | 4.4mm |
| Thickness | 1mm |
| REACH SVHC | No SVHC |
| RoHS Status | ROHS3 Compliant |
| Lead Free | Lead Free |
SN74LV164APWT Overview
In package 14-TSSOP (0.173, 4.40mm Width), there is an embedded device. This chip has a total termination count of 14. Tape & Reel (TR) is the case in which it is packed. There is 2.5V operating supply voltage listed on the part. A total of 1 elements can be found on this part. 14 pins are provided on the device. Surface Mount is recommended for mounting. In this case, the electronic component belongs to the LV/LV-A/LVX/H. Mounting of this component is indicated by Surface Mount. There is a range of temperatures -40°C~85°C for operation. There is a voltage supply within 2V~5.5V. It is part of the 74LV series of electrical components. If you use the 74LV164 family, you can find parts that are similar. Additional aspects of this section are as follows: AND-GATED SERIAL INPUTS (A AND B). For this part, Vsup should not be less than 2V. The device is capable of delivering voltage at 2.5/5V. This part requires a maximum supply voltage (Vsup) of 5.5V. It is necessary to operate 3 output lines. To package the part, TR is used. 50MHz is the frequency of the device.
SN74LV164APWT Features
With 14 pins
Mounted in Surface Mount type.
Based on 74LV164 family
It supplies 2.5/5V power
With 3 output lines
Packing Method : TR
SN74LV164APWT Applications
There are a lot of Texas Instruments SN74LV164APWT Shift Registers applications.
- Data manipulation
- 8-bit data storage
- ROM Chips
- Remote control holding register
- Pseudo Random Pattern Generator
- 7-segment display control
- Serial-to-parallel data conversion
- temporary data storage
- Dual-rank shift, hold, and bus applications
- data transfer