SN74LV164ANSRE4
| Parameters | |
|---|---|
| Mount | Surface Mount |
| Package / Case | SOP |
| Number of Pins | 14 |
| Weight | 210.013267mg |
| Packaging | Tape and Reel |
| JESD-609 Code | e4 |
| Pbfree Code | yes |
| Moisture Sensitivity Level (MSL) | 1 |
| Number of Terminations | 14 |
| Terminal Finish | Nickel/Palladium/Gold (Ni/Pd/Au) |
| Max Operating Temperature | 85°C |
| Min Operating Temperature | -40°C |
| Additional Feature | AND-GATED SERIAL INPUTS (A AND B) |
| Technology | CMOS |
| Terminal Position | DUAL |
| Terminal Form | GULL WING |
| Peak Reflow Temperature (Cel) | 260 |
| Number of Functions | 1 |
| Supply Voltage | 2.5V |
| Pin Count | 14 |
| Operating Supply Voltage | 5V |
| Number of Elements | 1 |
| Power Supplies | 3.3V |
| Temperature Grade | INDUSTRIAL |
| Max Supply Voltage | 5.5V |
| Min Supply Voltage | 2V |
| Propagation Delay | 11 ns |
| Turn On Delay Time | 24 ns |
| Family | LV/LV-A/LVX/H |
| Logic Function | Shift Register |
| Direction | Unidirectional |
| Output Characteristics | 3-STATE |
| Output Polarity | TRUE |
| Logic IC Type | SERIAL IN PARALLEL OUT |
| Number of Bits per Element | 8 |
| Trigger Type | POSITIVE EDGE |
| Number of Input Lines | 2 |
| Max Frequency@Nom-Sup | 45000000Hz |
| Width | 5.3mm |
| Radiation Hardening | No |
| RoHS Status | RoHS Compliant |
| Lead Free | Contains Lead |
SN74LV164ANSRE4 Overview
Embedded in a package of type SOP, the device is available for use. A total of 14 terminations can be found on the chip. A Tape and Reel case is used to pack it. This part has an operating supply voltage of 2.5V. The part consists of 1 elements. 14 pins are located on the device. It is recommended to mount by Surface Mount in order to get the best results. Electronic components are categorized as LV/LV-A/LVX/H. It is noted that the operating supply voltage of this chip falls within the range 5V. Additionally, please note the following: AND-GATED SERIAL INPUTS (A AND B). As far as the device is concerned, there are 2 input lines available. There is a possibility of delivering voltage at 3.3V. There are a total of 14 pins on it. Temperatures below 85°C are recommended for use. Operation of this device requires a value greater than -40°C. Under 5.5V, this supply voltage is employed. There is a voltage applied to the supply that is greater than 2V.
SN74LV164ANSRE4 Features
With 14 pins
Operate supply voltage at 5V
It supplies 3.3V power
SN74LV164ANSRE4 Applications
There are a lot of Texas Instruments SN74LV164ANSRE4 Shift Registers applications.
- Dual-rank shift, hold, and bus applications
- Parallel data
- Pseudo Random Pattern Generator
- 8-bit data storage
- ROM Chips
- Sequence generator
- Flash Memory
- Counter
- Remote control holding register
- Cache memory in CPU