SN74LS95BN
| Parameters | |
|---|---|
| Package / Case | PDIP |
| Surface Mount | NO |
| Pbfree Code | no |
| Number of Terminations | 14 |
| Additional Feature | SEPARATE CLOCKS FOR SHIFT RIGHT & LOAD |
| HTS Code | 8542.39.00.01 |
| Technology | TTL |
| Terminal Position | DUAL |
| Terminal Form | THROUGH-HOLE |
| Peak Reflow Temperature (Cel) | NOT SPECIFIED |
| Number of Functions | 1 |
| Supply Voltage | 5V |
| Terminal Pitch | 2.54mm |
| Reach Compliance Code | not_compliant |
| Time@Peak Reflow Temperature-Max (s) | NOT SPECIFIED |
| Pin Count | 14 |
| Qualification Status | Not Qualified |
| Operating Temperature (Max) | 70°C |
| Supply Voltage-Max (Vsup) | 5.25V |
| Power Supplies | 5V |
| Temperature Grade | COMMERCIAL |
| Supply Voltage-Min (Vsup) | 4.75V |
| Load Capacitance | 15pF |
| Number of Bits | 4 |
| Family | LS |
| Logic Function | Shift Register |
| Output Polarity | TRUE |
| Logic IC Type | PARALLEL IN PARALLEL OUT |
| Trigger Type | NEGATIVE EDGE |
| Propagation Delay (tpd) | 32 ns |
| Power Supply Current-Max (ICC) | 21mA |
| fmax-Min | 25 MHz |
| Count Direction | RIGHT |
| Max Frequency@Nom-Sup | 25000000Hz |
| Height Seated (Max) | 5.08mm |
| Length | 19.305mm |
| Width | 7.62mm |
| RoHS Status | Non-RoHS Compliant |
| Lead Free | Contains Lead |
SN74LS95BN Overview
In package PDIP, there is an embedded device. It sums up to 14 where the chip's terminations add up. Its operating supply voltage is rated at 5V. This electronic component is classified as LS. Taking note of the following additional details: SEPARATE CLOCKS FOR SHIFT RIGHT & LOAD. This part should have a minimum supply voltage (Vsup) of at least 4.75V. A voltage of 5V can be delivered by it. It should not exceed 5.25V in terms of the supply voltage (Vsup). IC chips contain a total of 4 bits. In total, it has 14 pins. No temperature higher than 70°C should be used.
SN74LS95BN Features
It supplies 5V power
SN74LS95BN Applications
There are a lot of Texas Instruments SN74LS95BN Shift Registers applications.
- store data in digital form
- Dual-rank shift, hold, and bus applications
- Interconnectors
- Data Format Converters
- data transfer
- Parallel to serial converter
- ROM Chips
- Counter
- Data manipulation
- temporary data storage