SN74LS673DWE4
| Parameters | |
|---|---|
| Mount | Surface Mount |
| Package / Case | SOIC |
| Number of Pins | 24 |
| Weight | 620.004071mg |
| JESD-609 Code | e4 |
| Pbfree Code | yes |
| Moisture Sensitivity Level (MSL) | 1 |
| Number of Terminations | 24 |
| Terminal Finish | Nickel/Palladium/Gold (Ni/Pd/Au) |
| Max Operating Temperature | 70°C |
| Min Operating Temperature | 0°C |
| Technology | TTL |
| Terminal Position | DUAL |
| Terminal Form | GULL WING |
| Peak Reflow Temperature (Cel) | 260 |
| Number of Functions | 1 |
| Supply Voltage | 5V |
| Pin Count | 24 |
| Operating Supply Voltage | 5V |
| Number of Elements | 1 |
| Temperature Grade | COMMERCIAL |
| Max Supply Voltage | 5.25V |
| Min Supply Voltage | 4.75V |
| Load Capacitance | 45pF |
| Number of Bits | 16 |
| Propagation Delay | 40 ns |
| Turn On Delay Time | 45 ns |
| Family | LS |
| Logic Function | Shift Register |
| Direction | Unidirectional |
| Output Characteristics | 3-STATE |
| Output Polarity | TRUE |
| Logic IC Type | SERIAL IN PARALLEL OUT |
| Trigger Type | NEGATIVE EDGE |
| Power Supply Current-Max (ICC) | 80mA |
| Number of Output Lines | 17 |
| fmax-Min | 20 MHz |
| Height Seated (Max) | 2.65mm |
| Width | 7.5mm |
| Radiation Hardening | No |
| RoHS Status | RoHS Compliant |
| Lead Free | Contains Lead |
SN74LS673DWE4 Overview
The device is embedded in SOIC package. 24 is the sum of the number of terminations in the chip. 5V is the part's operating supply voltage. It is a part that has 1 elements on it. In this device, there are 24 pins. As a general recommendation, mounting by Surface Mount is recommended. Electronic components belong to the LS group. As noted, this chip operates within the range of 5V. It has a total of 16 pins. This board has 24 pins in total. Under temperatures below 70°C, it is recommended to use it. For this device to work, it should not go below 0°C. A voltage of 5.25V is employed as the supply voltage. It is used at a voltage greater than 4.75V. It is necessary to operate 17 output lines.
SN74LS673DWE4 Features
With 24 pins
Operate supply voltage at 5V
With 17 output lines
SN74LS673DWE4 Applications
There are a lot of Texas Instruments SN74LS673DWE4 Shift Registers applications.
- Serial-to-parallel data conversion
- Sequence generator
- Serial to parallel converter
- Parallel to serial converter
- Pseudo Random Pattern Generator
- temporary data storage
- Dual-rank shift, hold, and bus applications
- Cache memory in CPU
- Remote control holding register
- 8-bit data storage