SN74LS597NSRE4
| Parameters | |
|---|---|
| Mount | Surface Mount |
| Package / Case | SOP |
| Number of Pins | 16 |
| Weight | 200.005886mg |
| Packaging | Tape & Reel (TR) |
| JESD-609 Code | e4 |
| Pbfree Code | yes |
| Moisture Sensitivity Level (MSL) | 1 |
| Number of Terminations | 16 |
| Terminal Finish | Nickel/Palladium/Gold (Ni/Pd/Au) |
| Max Operating Temperature | 70°C |
| Min Operating Temperature | 0°C |
| Additional Feature | SISO OPERATION ALSO AVAILABLE |
| Technology | TTL |
| Terminal Position | DUAL |
| Terminal Form | GULL WING |
| Peak Reflow Temperature (Cel) | 260 |
| Number of Functions | 1 |
| Supply Voltage | 5V |
| Pin Count | 16 |
| Operating Supply Voltage | 5V |
| Number of Elements | 1 |
| Power Supplies | 5V |
| Temperature Grade | COMMERCIAL |
| Max Supply Voltage | 5.25V |
| Min Supply Voltage | 4.75V |
| Number of Bits | 8 |
| Propagation Delay | 60 ns |
| Turn On Delay Time | 60 ns |
| Family | LS |
| Logic Function | Shift Register |
| Direction | Unidirectional |
| Output Characteristics | 3-STATE |
| Output Polarity | TRUE |
| Logic IC Type | PARALLEL IN SERIAL OUT |
| Trigger Type | POSITIVE EDGE |
| Number of Input Lines | 9 |
| fmax-Min | 20 MHz |
| Max Frequency@Nom-Sup | 20000000Hz |
| Height Seated (Max) | 2mm |
| Width | 5.3mm |
| Radiation Hardening | No |
| RoHS Status | RoHS Compliant |
| Lead Free | Contains Lead |
SN74LS597NSRE4 Overview
In package SOP, there is an embedded device. It sums up to 16 where the chip's terminations add up. It is packed in a case number Tape & Reel (TR). The part operates at 5V voltage. It is a part that has 1 elements on it. There are 16 pins on the device. It is recommended that the mount should be done by Surface Mount. This electronic component is classified as LS. It is noted that the operating supply voltage of this chip falls within the range 5V. The following additional aspects of this section are worth noting: SISO OPERATION ALSO AVAILABLE. The device has 9 input lines. Voltage can be delivered at 5V. IC chip bits total 8. 16 pins are present on it. Using it below 70°C is recommended. In order to operate the device, the value should not fall below 0°C. This supply voltage is employed under 5.25V. It is important to note that this supply voltage is higher than 4.75V.
SN74LS597NSRE4 Features
With 16 pins
Operate supply voltage at 5V
It supplies 5V power
SN74LS597NSRE4 Applications
There are a lot of Texas Instruments SN74LS597NSRE4 Shift Registers applications.
- Dual-rank shift, hold, and bus applications
- Delay Line
- LED matrix control
- data transfer
- Cache memory in CPU
- Data manipulation
- Data Processors
- Flash Memory
- Data Format Converters
- Serial-to-parallel data conversion