SN74LS597NE4
| Parameters | |
|---|---|
| Mount | Through Hole |
| Package / Case | PDIP |
| Number of Pins | 16 |
| Weight | 951.693491mg |
| JESD-609 Code | e4 |
| Pbfree Code | yes |
| Number of Terminations | 16 |
| Terminal Finish | Nickel/Palladium/Gold (Ni/Pd/Au) |
| Max Operating Temperature | 70°C |
| Min Operating Temperature | 0°C |
| Additional Feature | COMMON I/O PINS; MIXED SERIAL INPUTS; TOTEMPOLE SERIAL OUTPUT |
| Technology | TTL |
| Terminal Position | DUAL |
| Number of Functions | 1 |
| Supply Voltage | 5V |
| Terminal Pitch | 2.54mm |
| Pin Count | 16 |
| Operating Supply Voltage | 5V |
| Number of Elements | 1 |
| Temperature Grade | COMMERCIAL |
| Max Supply Voltage | 5.25V |
| Min Supply Voltage | 4.75V |
| Load Capacitance | 30pF |
| Number of Bits | 8 |
| Propagation Delay | 60 ns |
| Turn On Delay Time | 60 ns |
| Family | LS |
| Logic Function | Shift Register |
| Direction | Unidirectional |
| Output Characteristics | 3-STATE |
| Output Polarity | TRUE |
| Logic IC Type | PARALLEL IN SERIAL OUT |
| Trigger Type | POSITIVE EDGE |
| Power Supply Current-Max (ICC) | 53mA |
| Number of Input Lines | 9 |
| fmax-Min | 35 MHz |
| Width | 7.62mm |
| Radiation Hardening | No |
| RoHS Status | RoHS Compliant |
| Lead Free | Contains Lead |
SN74LS597NE4 Overview
This device can be found embedded within the package PDIP. There are 16 terminations on the chip. Its operating supply voltage is rated at 5V. On this part, there are 1 elements. 16 pins are present on the device. Using Through Hole as a mount point is recommended. Electronic components fall under the category of LS. A range of 5V is noted as the operating supply voltage of this chip. Please take note of the following additional aspects of this section: COMMON I/O PINS; MIXED SERIAL INPUTS; TOTEMPOLE SERIAL OUTPUT. In the device, there are 9 input lines that are available for use. There are 8 bits in the IC chip. 16 pins are on it. Under temperatures below 70°C, it is recommended to use it. In order for this device to function, the value should not be less than 0°C. A voltage of this type is employed under 5.25V. It is used at a voltage greater than 4.75V.
SN74LS597NE4 Features
With 16 pins
Operate supply voltage at 5V
SN74LS597NE4 Applications
There are a lot of Texas Instruments SN74LS597NE4 Shift Registers applications.
- temporary data storage
- Flash Memory
- Serial-to-parallel data conversion
- Interconnectors
- Sequence generator
- data transfer
- Generate time delay toward digital circuits
- Delay Line
- LED matrix control
- Parallel data