SN74LS596NE4
| Parameters | |
|---|---|
| Mount | Through Hole |
| Package / Case | PDIP |
| Number of Pins | 16 |
| Weight | 949.99252mg |
| Packaging | Rail/Tube |
| JESD-609 Code | e4 |
| Pbfree Code | yes |
| Number of Terminations | 16 |
| Terminal Finish | Nickel/Palladium/Gold (Ni/Pd/Au) |
| Max Operating Temperature | 70°C |
| Min Operating Temperature | 0°C |
| Additional Feature | PARALLEL OUTPUT IS REGISTERED; UNREGISTERED SERIAL SHIFT RIGHT OUTPUT |
| Technology | TTL |
| Terminal Position | DUAL |
| Number of Functions | 1 |
| Supply Voltage | 5V |
| Terminal Pitch | 2.54mm |
| Pin Count | 16 |
| Operating Supply Voltage | 5V |
| Number of Elements | 1 |
| Power Supplies | 5V |
| Temperature Grade | COMMERCIAL |
| Max Supply Voltage | 5.25V |
| Min Supply Voltage | 4.75V |
| Load Capacitance | 30pF |
| Number of Bits | 8 |
| Propagation Delay | 42 ns |
| Turn On Delay Time | 60 ns |
| Family | LS |
| Logic Function | Shift Register |
| Direction | Unidirectional |
| Output Characteristics | OPEN-COLLECTOR |
| Output Polarity | TRUE |
| Logic IC Type | SERIAL IN PARALLEL OUT |
| Trigger Type | POSITIVE EDGE |
| Power Supply Current-Max (ICC) | 55mA |
| Number of Output Lines | 9 |
| fmax-Min | 20 MHz |
| Width | 7.62mm |
| Radiation Hardening | No |
| RoHS Status | RoHS Compliant |
| Lead Free | Contains Lead |
SN74LS596NE4 Overview
There is a PDIP package embedded with the device. It sums up to 16 where the chip's terminations add up. A Rail/Tube case is used to pack it. 5V is the part's operating supply voltage. A total of 1 elements can be found on this part. It has 16 pins. As a general recommendation, mounting by Through Hole is recommended. This electronic component is classified as LS. It is noted that the operating supply voltage of this chip falls within the range 5V. Additional aspects of this section are as follows: PARALLEL OUTPUT IS REGISTERED; UNREGISTERED SERIAL SHIFT RIGHT OUTPUT. There is a possibility of delivering voltage at 5V. IC chip bits total 8. The pin count is 16. This product should not be used at temperatures above 70°C. Operation of this device requires a value greater than 0°C. A voltage of 5.25V is employed as the supply voltage. It is necessary to use a voltage that is higher than 4.75V to provide this supply. It is necessary to operate 9 output lines.
SN74LS596NE4 Features
With 16 pins
Operate supply voltage at 5V
It supplies 5V power
With 9 output lines
SN74LS596NE4 Applications
There are a lot of Texas Instruments SN74LS596NE4 Shift Registers applications.
- data transfer
- Pseudo Random Pattern Generator
- Counter
- Remote control holding register
- temporary data storage
- ROM Chips
- Delay Line
- Serial-to-parallel data conversion
- Serial to parallel converter
- Data Processors