SN74LS595NS
| Parameters | |
|---|---|
| Package / Case | SOP |
| Surface Mount | YES |
| Pbfree Code | yes |
| Number of Terminations | 16 |
| Additional Feature | PARALLEL OUTPUT IS REGISTERED; UNREGISTERED SERIAL SHIFT RIGHT OUTPUT |
| HTS Code | 8542.39.00.01 |
| Technology | TTL |
| Terminal Position | DUAL |
| Terminal Form | GULL WING |
| Peak Reflow Temperature (Cel) | NOT SPECIFIED |
| Number of Functions | 1 |
| Supply Voltage | 5V |
| Terminal Pitch | 1.27mm |
| Time@Peak Reflow Temperature-Max (s) | NOT SPECIFIED |
| Pin Count | 16 |
| JESD-30 Code | R-PDSO-G16 |
| Qualification Status | Not Qualified |
| Operating Temperature (Max) | 70°C |
| Supply Voltage-Max (Vsup) | 5.25V |
| Power Supplies | 5V |
| Temperature Grade | COMMERCIAL |
| Supply Voltage-Min (Vsup) | 4.75V |
| Number of Bits | 8 |
| Family | LS |
| Logic Function | Shift Register |
| Output Characteristics | 3-STATE |
| Output Polarity | TRUE |
| Logic IC Type | SERIAL IN PARALLEL OUT |
| Trigger Type | POSITIVE EDGE |
| Propagation Delay (tpd) | 25 ns |
| fmax-Min | 20 MHz |
| Count Direction | RIGHT |
| Max Frequency@Nom-Sup | 20000000Hz |
| Height Seated (Max) | 2mm |
| Length | 10.2mm |
| Width | 5.3mm |
| RoHS Status | RoHS Compliant |
SN74LS595NS Overview
As a result, SOP package contains the embedded device. This chip has a total termination count of 16. Voltage rating of the part is 5V. Electronic components are categorized as LS. This section has the following additional features: PARALLEL OUTPUT IS REGISTERED; UNREGISTERED SERIAL SHIFT RIGHT OUTPUT. It is recommended that this part's supply voltage (Vsup) must not be less than 4.75V. The device is capable of delivering voltage at 5V. The maximum supply voltage (Vsup) for this part should not be more than 5.25V. IC chips contain a total of 8 bits. This board has 16 pins in total. You should not use it above 70°C.
SN74LS595NS Features
It supplies 5V power
SN74LS595NS Applications
There are a lot of Texas Instruments SN74LS595NS Shift Registers applications.
- LED matrix control
- Dual-rank shift, hold, and bus applications
- Generate time delay toward digital circuits
- Parallel data
- Output expansion
- Serial to parallel converter
- Flash Memory
- Data Format Converters
- Remote control holding register
- Pseudo Random Pattern Generator