SN74LS595DR
| Parameters | |
|---|---|
| Operating Temperature | 0°C~70°C |
| Packaging | Cut Tape (CT) |
| Series | 74LS |
| JESD-609 Code | e4 |
| Pbfree Code | yes |
| Part Status | Active |
| Moisture Sensitivity Level (MSL) | 1 (Unlimited) |
| Number of Terminations | 16 |
| ECCN Code | EAR99 |
| Terminal Finish | Nickel/Palladium/Gold (Ni/Pd/Au) |
| Additional Feature | SERIAL OUTPUT PIN FOR CASCADING |
| Packing Method | TR |
| Technology | TTL |
| Voltage - Supply | 4.75V~5.25V |
| Terminal Position | DUAL |
| Terminal Form | GULL WING |
| Peak Reflow Temperature (Cel) | 260 |
| Supply Voltage | 5V |
| Time@Peak Reflow Temperature-Max (s) | NOT SPECIFIED |
| Base Part Number | 74LS595 |
| Function | Serial to Parallel, Serial |
| Qualification Status | Not Qualified |
| Output Type | Tri-State |
| Operating Supply Voltage | 5V |
| Number of Elements | 1 |
| Power Supplies | 5V |
| Number of Circuits | 8 |
| Load Capacitance | 45pF |
| Number of Bits | 8 |
| Propagation Delay | 35 ns |
| Turn On Delay Time | 38 ns |
| Family | LS |
| Logic Function | Shift Register |
| Direction | Unidirectional |
| Output Characteristics | 3-STATE |
| Logic Type | Shift Register |
| Output Polarity | TRUE |
| Max I(ol) | 0.024 A |
| Prop. Delay@Nom-Sup | 25 ns |
| Trigger Type | POSITIVE EDGE |
| Schmitt Trigger | No |
| Power Supply Current-Max (ICC) | 65mA |
| fmax-Min | 20 MHz |
| Height | 1.75mm |
| Length | 9.9mm |
| Width | 3.91mm |
| Thickness | 1.58mm |
| RoHS Status | ROHS3 Compliant |
| Lead Free | Lead Free |
| Factory Lead Time | 6 Weeks |
| Lifecycle Status | ACTIVE (Last Updated: 1 week ago) |
| Mount | Surface Mount |
| Mounting Type | Surface Mount |
| Package / Case | 16-SOIC (0.154, 3.90mm Width) |
| Number of Pins | 16 |
| Weight | 141.690917mg |
SN74LS595DR Overview
This device can be found embedded within the package 16-SOIC (0.154, 3.90mm Width). Chip terminations add up to 16. This item is packed in case Cut Tape (CT). 5V is the operating supply voltage of the part. 1 elements are present in this part. In this device, there are 16 pins. Surface Mount is recommended for mounting. This electronic component is classified as LS. Mounted in the same way as Surface Mount. 0°C~70°C is the operating temperature range. Votage within 4.75V~5.25V is supplied. This electrical component belongs to the 74LS series. If you use the 74LS595 family, you can find parts that are similar. A range of 5V is noted as the operating supply voltage of this chip. Additional aspects of this section are as follows: SERIAL OUTPUT PIN FOR CASCADING. Voltage can be delivered at 5V by the device. The total number of IC chip bits is 8. There are 8 circuits in this device. TR is used to package the part.
SN74LS595DR Features
With 16 pins
Mounted in Surface Mount type.
Based on 74LS595 family
Operate supply voltage at 5V
It supplies 5V power
Packing Method : TR
SN74LS595DR Applications
There are a lot of Texas Instruments SN74LS595DR Shift Registers applications.
- Serial-to-parallel data conversion
- data transfer
- Output expansion
- Remote control holding register
- Cache memory in CPU
- Pattern Recognizers
- Counter
- Interconnectors
- 8-bit data storage
- temporary data storage