| Parameters |
| Mount |
Through Hole |
| Package / Case |
PDIP |
| Number of Pins |
16 |
| Weight |
949.99252mg |
| JESD-609 Code |
e4 |
| Pbfree Code |
no |
| Number of Terminations |
16 |
| Terminal Finish |
Nickel/Palladium/Gold (Ni/Pd/Au) |
| Max Operating Temperature |
70°C |
| Min Operating Temperature |
0°C |
| Technology |
TTL |
| Terminal Position |
DUAL |
| Number of Functions |
1 |
| Supply Voltage |
5V |
| Terminal Pitch |
2.54mm |
| Pin Count |
16 |
| Operating Supply Voltage |
5V |
| Number of Elements |
1 |
| Temperature Grade |
COMMERCIAL |
| Max Supply Voltage |
5.25V |
| Min Supply Voltage |
4.75V |
| Load Capacitance |
30pF |
| Number of Bits |
8 |
| Propagation Delay |
30 ns |
| Turn On Delay Time |
57 ns |
| Family |
LS |
| Logic Function |
Shift Register |
| Direction |
Unidirectional |
| Output Polarity |
TRUE |
| Logic IC Type |
SERIAL IN PARALLEL OUT |
| Trigger Type |
POSITIVE EDGE |
| Power Supply Current-Max (ICC) |
65mA |
| Number of Output Lines |
9 |
| fmax-Min |
20 MHz |
| Width |
7.62mm |
| Radiation Hardening |
No |
| RoHS Status |
RoHS Compliant |
| Lead Free |
Contains Lead |
SN74LS594NE4 Overview
The device is embedded in PDIP package. There are 16 terminations on the chip. Voltage rating of the part is 5V. It is a part that has 1 elements on it. 16 pins are available on the device. It is recommended that the mount should be done by Through Hole. It is a component of the LS. In terms of supply voltage, this chip operates within the range of 5V. The total number of IC chip bits is 8. It has a total of zero pins. Using it below 70°C is recommended. In order for this device to function, the value should not be less than 0°C. A voltage of 5.25V is employed as the supply voltage. It is important to note that this supply voltage is higher than 4.75V. Operating on 9 output lines is possible.
SN74LS594NE4 Features
With 16 pins
Operate supply voltage at 5V
With 9 output lines
SN74LS594NE4 Applications
There are a lot of Texas Instruments SN74LS594NE4 Shift Registers applications.
- ROM Chips
- Pulse Extenders
- Generate time delay toward digital circuits
- 7-segment display control
- Parallel data
- Counter
- Data Processors
- Dual-rank shift, hold, and bus applications
- Delay Line
- Pattern Recognizers