SN74LS395AN
| Parameters | |
|---|---|
| Package / Case | PDIP |
| Surface Mount | NO |
| Number of Pins | 16 |
| Pbfree Code | no |
| Number of Terminations | 16 |
| Additional Feature | TOTEMPOLE SERIAL SHIFT RIGHT OUTPUT |
| HTS Code | 8542.39.00.01 |
| Subcategory | Shift Registers |
| Technology | TTL |
| Terminal Position | DUAL |
| Terminal Form | THROUGH-HOLE |
| Peak Reflow Temperature (Cel) | NOT SPECIFIED |
| Number of Functions | 1 |
| Supply Voltage | 5V |
| Terminal Pitch | 2.54mm |
| Time@Peak Reflow Temperature-Max (s) | NOT SPECIFIED |
| Pin Count | 16 |
| Qualification Status | Not Qualified |
| Operating Temperature (Max) | 70°C |
| Supply Voltage-Max (Vsup) | 5.25V |
| Power Supplies | 5V |
| Temperature Grade | COMMERCIAL |
| Supply Voltage-Min (Vsup) | 4.75V |
| Load Capacitance | 45pF |
| Number of Bits | 4 |
| Family | LS |
| Output Characteristics | 3-STATE |
| Output Polarity | TRUE |
| Logic IC Type | PARALLEL IN PARALLEL OUT |
| Trigger Type | NEGATIVE EDGE |
| Propagation Delay (tpd) | 30 ns |
| Power Supply Current-Max (ICC) | 31mA |
| fmax-Min | 30 MHz |
| Count Direction | RIGHT |
| Height Seated (Max) | 5.08mm |
| Length | 19.305mm |
| Width | 7.62mm |
| RoHS Status | RoHS Compliant |
| Lead Free | Contains Lead |
SN74LS395AN Overview
PDIP package contains the device. It sums up to 16 where the chip's terminations add up. There is 5V operating supply voltage listed on the part. 16 pins are present on the device. Electronic components are categorized as LS. Additionally, please note the following: TOTEMPOLE SERIAL SHIFT RIGHT OUTPUT. The minimum supply voltage (Vsup) for this part should not be less than 4.75V. Voltage can be delivered at 5V. This part requires a maximum supply voltage (Vsup) of 5.25V. There are 4 bits on the IC chip. 16 pins are present on it. In its subcategory, it is listed under Shift Registers. You should not use it above 70°C.
SN74LS395AN Features
With 16 pins
It supplies 5V power
SN74LS395AN Applications
There are a lot of Texas Instruments SN74LS395AN Shift Registers applications.
- Data manipulation
- Data Processors
- Parallel data
- Serial to parallel converter
- Data Format Converters
- Output expansion
- Serial-to-parallel data conversion
- Interconnectors
- Generate time delay toward digital circuits
- LED matrix control