SN74LS299DWG4
| Parameters | |
|---|---|
| Mount | Surface Mount |
| Package / Case | SOIC |
| Number of Pins | 20 |
| Weight | 500.000539mg |
| Packaging | Rail/Tube |
| JESD-609 Code | e4 |
| Pbfree Code | yes |
| Moisture Sensitivity Level (MSL) | 1 |
| Number of Terminations | 20 |
| Terminal Finish | Nickel/Palladium/Gold (Ni/Pd/Au) |
| Max Operating Temperature | 70°C |
| Min Operating Temperature | 0°C |
| Additional Feature | HOLD MODE; COMMON I/O PINS |
| Technology | TTL |
| Terminal Position | DUAL |
| Terminal Form | GULL WING |
| Peak Reflow Temperature (Cel) | 260 |
| Number of Functions | 1 |
| Supply Voltage | 5V |
| Pin Count | 20 |
| Operating Supply Voltage | 5V |
| Power Supplies | 5V |
| Temperature Grade | COMMERCIAL |
| Number of Circuits | 1 |
| Max Supply Voltage | 5.25V |
| Min Supply Voltage | 4.75V |
| Number of Bits | 8 |
| Propagation Delay | 39 ns |
| Turn On Delay Time | 40 ns |
| Family | LS |
| Logic Function | Shift Register |
| Direction | Bidirectional |
| Output Characteristics | 3-STATE |
| Output Polarity | TRUE |
| Logic IC Type | PARALLEL IN PARALLEL OUT |
| Trigger Type | POSITIVE EDGE |
| Number of Input Lines | 10 |
| Height Seated (Max) | 2.65mm |
| Width | 7.5mm |
| Radiation Hardening | No |
| RoHS Status | RoHS Compliant |
| Lead Free | Contains Lead |
SN74LS299DWG4 Overview
This device can be found embedded within the package SOIC. Taking the total number of terminations on the chip and adding them up, we get 20. There is a Rail/Tube case containing it. Its operating supply voltage is rated at 5V. 20 pins are provided on the device. The recommended mounting method is Surface Mount. In the LS series, the electronic component belongs. As noted, this chip operates within the range of 5V. The following additional aspects of this section are worth noting: HOLD MODE; COMMON I/O PINS. In the device, there are 10 input lines that are available for use. Voltage can be delivered at 5V. There are 8 bits in the IC chip. It has a total of zero pins. Using it below 70°C is recommended. This device should not be operated with a value lower than 0°C. Under 5.25V, this voltage is employed. It is used at a voltage greater than 4.75V. This device contains 1 circuits.
SN74LS299DWG4 Features
With 20 pins
Operate supply voltage at 5V
It supplies 5V power
SN74LS299DWG4 Applications
There are a lot of Texas Instruments SN74LS299DWG4 Shift Registers applications.
- Flash Memory
- Pulse Extenders
- Data manipulation
- data transfer
- Serial to parallel converter
- ROM Chips
- Sequence generator
- Output expansion
- Serial-to-parallel data conversion
- 7-segment display control