SN74LS194ADE4
| Parameters | |
|---|---|
| Mount | Surface Mount |
| Package / Case | SOIC |
| Number of Pins | 16 |
| Weight | 139.989945mg |
| JESD-609 Code | e4 |
| Pbfree Code | yes |
| Moisture Sensitivity Level (MSL) | 1 |
| Number of Terminations | 16 |
| Terminal Finish | Nickel/Palladium/Gold (Ni/Pd/Au) |
| Max Operating Temperature | 70°C |
| Min Operating Temperature | 0°C |
| Additional Feature | HOLD MODE |
| Technology | TTL |
| Terminal Position | DUAL |
| Terminal Form | GULL WING |
| Peak Reflow Temperature (Cel) | 260 |
| Number of Functions | 1 |
| Supply Voltage | 5V |
| Pin Count | 16 |
| Operating Supply Voltage | 5V |
| Power Supplies | 5V |
| Temperature Grade | COMMERCIAL |
| Number of Circuits | 1 |
| Max Supply Voltage | 5.25V |
| Min Supply Voltage | 4.75V |
| Number of Bits | 4 |
| Propagation Delay | 26 ns |
| Family | LS |
| Logic Function | Shift Register |
| Direction | Bidirectional |
| Output Polarity | TRUE |
| Logic IC Type | PARALLEL IN PARALLEL OUT |
| Trigger Type | POSITIVE EDGE |
| Power Supply Current-Max (ICC) | 23mA |
| Number of Input Lines | 6 |
| Number of Output Lines | 4 |
| fmax-Min | 25 MHz |
| Max Frequency@Nom-Sup | 25000000Hz |
| Length | 9.9mm |
| Width | 3.9mm |
| Radiation Hardening | No |
| RoHS Status | RoHS Compliant |
| Lead Free | Contains Lead |
SN74LS194ADE4 Overview
As a result, SOIC package contains the embedded device. A total of 16 terminations can be found on the chip. Its operating supply voltage is rated at 5V. The device is equipped with 16 pins. As a general recommendation, mounting by Surface Mount is recommended. It is a component of the LS. The operating supply voltage of this chip is noted to be within the range 5V. Additionally, please note the following: HOLD MODE. The device has a total of 6 input lines. The device is capable of delivering voltage at 5V. A total of 4 bits are present on the IC chip. It has a total of 16 pins. Using it below 70°C is recommended. Operation of this device requires a value greater than 0°C. This supply voltage is employed under 5.25V. A voltage higher than 4.75V is used as a supply voltage. It is necessary to operate 4 output lines of the system. In this device, there are 1 circuits that are active at the same time.
SN74LS194ADE4 Features
With 16 pins
Operate supply voltage at 5V
It supplies 5V power
With 4 output lines
SN74LS194ADE4 Applications
There are a lot of Texas Instruments SN74LS194ADE4 Shift Registers applications.
- temporary data storage
- Pseudo Random Pattern Generator
- LED matrix control
- Generate time delay toward digital circuits
- ROM Chips
- Pulse Extenders
- Serial to parallel converter
- Sequence generator
- Dual-rank shift, hold, and bus applications
- Data Format Converters