SN74LS165ANSRG4
| Parameters | |
|---|---|
| Temperature Grade | COMMERCIAL |
| Max Supply Voltage | 5.25V |
| Min Supply Voltage | 4.75V |
| Number of Bits | 8 |
| Propagation Delay | 25 ns |
| Turn On Delay Time | 35 ns |
| Family | LS |
| Logic Function | OR, Shift Register |
| Direction | Unidirectional |
| Output Polarity | COMPLEMENTARY |
| Logic IC Type | PARALLEL IN SERIAL OUT |
| Trigger Type | POSITIVE EDGE |
| Number of Input Lines | 9 |
| fmax-Min | 25 MHz |
| Max Frequency@Nom-Sup | 25000000Hz |
| Height Seated (Max) | 2mm |
| Width | 5.3mm |
| Radiation Hardening | No |
| RoHS Status | RoHS Compliant |
| Lead Free | Contains Lead |
| Mount | Surface Mount |
| Package / Case | SOP |
| Number of Pins | 16 |
| Weight | 200.005886mg |
| Packaging | Tape & Reel (TR) |
| JESD-609 Code | e4 |
| Pbfree Code | yes |
| Moisture Sensitivity Level (MSL) | 1 |
| Number of Terminations | 16 |
| Terminal Finish | Nickel/Palladium/Gold (Ni/Pd/Au) |
| Max Operating Temperature | 70°C |
| Min Operating Temperature | 0°C |
| Additional Feature | SISO OPERATION ALSO AVAILABLE |
| Subcategory | Shift Registers |
| Technology | TTL |
| Terminal Position | DUAL |
| Terminal Form | GULL WING |
| Peak Reflow Temperature (Cel) | 260 |
| Number of Functions | 1 |
| Supply Voltage | 5V |
| Pin Count | 16 |
| Operating Supply Voltage | 5V |
| Number of Elements | 1 |
| Power Supplies | 5V |
SN74LS165ANSRG4 Overview
SOP is a package containing the embedded device. A total of 16 terminations can be found on the chip. It is used to pack in Tape & Reel (TR) case. This part has an operating supply voltage of 5V. A total of 1 elements can be found on this part. 16 pins are provided on the device. It is recommended that the mount should be done by Surface Mount. This electronic component is classified as LS. A range of 5V is noted as the operating supply voltage of this chip. Additionally, please note the following: SISO OPERATION ALSO AVAILABLE. This device has 9 input lines available. There is a capability to deliver voltage at 5V. There are 8 bits in the IC chip. The pin count is 16. A temperature below 70°C is recommended for its use. In order to operate the device, the value should not fall below 0°C. This supply voltage is employed under 5.25V. Voltages higher than 4.75V are used for this supply. It belongs to the Shift Registers subcategory.
SN74LS165ANSRG4 Features
With 16 pins
Operate supply voltage at 5V
It supplies 5V power
SN74LS165ANSRG4 Applications
There are a lot of Texas Instruments SN74LS165ANSRG4 Shift Registers applications.
- Delay Line
- Pulse Extenders
- data transfer
- ROM Chips
- Generate time delay toward digital circuits
- Parallel to serial converter
- data manipulation
- Serial to parallel converter
- Data manipulation
- Pattern Recognizers