SN74HC193N
| Parameters | |
|---|---|
| Factory Lead Time | 6 Weeks |
| Lifecycle Status | ACTIVE (Last Updated: 4 days ago) |
| Contact Plating | Gold |
| Mount | Through Hole |
| Mounting Type | Through Hole |
| Package / Case | 16-DIP (0.300, 7.62mm) |
| Number of Pins | 16 |
| Weight | 951.693491mg |
| Operating Temperature | -40°C~85°C |
| Packaging | Tube |
| Series | 74HC |
| JESD-609 Code | e4 |
| Part Status | Active |
| Moisture Sensitivity Level (MSL) | 1 (Unlimited) |
| Number of Terminations | 16 |
| ECCN Code | EAR99 |
| Additional Feature | SEPARATE UP/DOWN CLOCK |
| Technology | CMOS |
| Voltage - Supply | 2V~6V |
| Terminal Position | DUAL |
| Number of Functions | 1 |
| Supply Voltage | 5V |
| Frequency | 60MHz |
| Base Part Number | 74HC193 |
| Pin Count | 16 |
| Operating Supply Voltage | 5V |
| Number of Elements | 1 |
| Supply Voltage-Max (Vsup) | 6V |
| Power Supplies | 2/6V |
| Supply Voltage-Min (Vsup) | 2V |
| Load Capacitance | 50pF |
| Propagation Delay | 325 ns |
| Turn On Delay Time | 325 ns |
| Reset | Asynchronous |
| Family | HC/UH |
| Logic Function | Counter |
| Direction | Up, Down |
| Logic Type | Binary Counter |
| Max I(ol) | 0.0052 A |
| Number of Bits per Element | 4 |
| Prop. Delay@Nom-Sup | 55 ns |
| Trigger Type | Positive Edge |
| Power Supply Current-Max (ICC) | 0.08mA |
| Clock Edge Trigger Type | Positive Edge |
| Count Rate | 24MHz |
| Timing | Synchronous |
| Height | 5.08mm |
| Length | 19.3mm |
| Width | 6.35mm |
| Thickness | 3.9mm |
| Radiation Hardening | No |
| REACH SVHC | No SVHC |
| RoHS Status | ROHS3 Compliant |
| Lead Free | Lead Free |
SN74HC193N Overview
A 16-DIP (0.300, 7.62mm)package is used for this device. There are 16terminations used for configuring it. As a result of the supply voltage of 0, 5Vcan operate in a fully flexible manner. The device contains 1terminations. The total number of component pins is 16. As a result, it is packaged in the way of a Tube. In the circuit, there are 16pins that connect other parts. It is mounted in the way of [0]. In this case, it emerges as a member of the HC/UH family. Having been designed as a member of the 74HCseries, it is well suited for use in a wide range of applications. The logic type of Binary Counter is adopted. -40°C~85°Cis the recommended operating temperature. There is a mounting type of Through Holeon this device. In the case of a supply voltage of [0], it operates more reliably. The array contains elements that store 4bits each. An important feature of this electronic device is [0]. Under its base part number of [0], you will find additional related parts. From the voltage source, there is a voltage of 2/6V volts. In order to operate, it requires a voltage of [0]. Supply voltages can be as low as 2V volts (Vsup). There is 60MHz frequency associated with it. A maximum supply voltage (Vsup) is available up to 6V.
SN74HC193N Features
Embedded in the 16-DIP (0.300, 7.62mm) package
4 bits per element
SEPARATE UP/DOWN CLOCK
Operating supply voltage of 5V
Frequency of 60MHz
SN74HC193N Applications
There are a lot of Texas Instruments SN74HC193N Counters & Dividers applications.
- SQUARING
- SQUARE ROOT
- ANALOG SIGNAL PROCESSING
- Communications Digital Frequency Synthesizers;
- Timing applications
- Time delay circuits
- Frequency division
- Divide-by-N counting
- Binary counter/decoder
- Time-delay circuits