SN74HC166PWTE4
| Parameters | |
|---|---|
| Mount | Surface Mount |
| Package / Case | TSSOP |
| Number of Pins | 16 |
| Weight | 59.987591mg |
| Packaging | Tape & Reel (TR) |
| JESD-609 Code | e4 |
| Pbfree Code | yes |
| Moisture Sensitivity Level (MSL) | 1 |
| Number of Terminations | 16 |
| Terminal Finish | Nickel/Palladium/Gold (Ni/Pd/Au) |
| Max Operating Temperature | 85°C |
| Min Operating Temperature | -40°C |
| Additional Feature | SISO OPERATION ALSO AVAILABLE |
| Subcategory | Shift Registers |
| Technology | CMOS |
| Terminal Position | DUAL |
| Terminal Form | GULL WING |
| Peak Reflow Temperature (Cel) | 260 |
| Number of Functions | 1 |
| Supply Voltage | 5V |
| Terminal Pitch | 0.65mm |
| Pin Count | 16 |
| Operating Supply Voltage | 5V |
| Number of Elements | 1 |
| Temperature Grade | INDUSTRIAL |
| Max Supply Voltage | 6V |
| Min Supply Voltage | 2V |
| Propagation Delay | 26 ns |
| Family | HC/UH |
| Logic Function | OR, Shift Register |
| Direction | Unidirectional |
| Output Polarity | TRUE |
| Logic IC Type | PARALLEL IN SERIAL OUT |
| Number of Bits per Element | 8 |
| Trigger Type | POSITIVE EDGE |
| Number of Input Lines | 9 |
| Max Frequency@Nom-Sup | 25000000Hz |
| Length | 5mm |
| Width | 4.4mm |
| Radiation Hardening | No |
| RoHS Status | RoHS Compliant |
| Lead Free | Contains Lead |
SN74HC166PWTE4 Overview
Embedded in a package of type TSSOP, the device is available for use. 16 is the number of terminations on the chip. It is packed in a case number Tape & Reel (TR). Its operating supply voltage is rated at 5V. A total of 1 elements are present on this part. 16 pins are available on the device. The recommended mounting method is Surface Mount. There is an electronic component in the HC/UH. 5V is noted as the operating supply voltage of this chip. Additional aspects of this section include: SISO OPERATION ALSO AVAILABLE. 9 input lines are available on the device. 16 pins are on it. A temperature below 85°C is recommended for its use. For this device to operate, it cannot be lower than -40°C. It is employed under the condition of 6V. This supply voltage is employed higher than 2V. It belongs to the Shift Registers subcategory.
SN74HC166PWTE4 Features
With 16 pins
Operate supply voltage at 5V
SN74HC166PWTE4 Applications
There are a lot of Texas Instruments SN74HC166PWTE4 Shift Registers applications.
- Flash Memory
- Pattern Recognizers
- Remote control holding register
- temporary data storage
- Parallel data
- Remote control holding register
- Data Processors
- Serial-to-parallel data conversion
- data manipulation
- ROM Chips