SN74HC166PWE4
| Parameters | |
|---|---|
| Mount | Surface Mount |
| Package / Case | TSSOP |
| Number of Pins | 16 |
| Weight | 59.987591mg |
| Packaging | Rail/Tube |
| JESD-609 Code | e4 |
| Pbfree Code | yes |
| Moisture Sensitivity Level (MSL) | 1 |
| Number of Terminations | 16 |
| Terminal Finish | Nickel/Palladium/Gold (Ni/Pd/Au) |
| Max Operating Temperature | 85°C |
| Min Operating Temperature | -40°C |
| Additional Feature | SISO OPERATION ALSO AVAILABLE |
| Subcategory | Shift Registers |
| Technology | CMOS |
| Terminal Position | DUAL |
| Terminal Form | GULL WING |
| Peak Reflow Temperature (Cel) | 260 |
| Number of Functions | 1 |
| Supply Voltage | 5V |
| Terminal Pitch | 0.65mm |
| Pin Count | 16 |
| Operating Supply Voltage | 5V |
| Number of Elements | 1 |
| Temperature Grade | INDUSTRIAL |
| Max Supply Voltage | 6V |
| Min Supply Voltage | 2V |
| Number of Bits | 8 |
| Propagation Delay | 26 ns |
| Turn On Delay Time | 190 ns |
| Family | HC/UH |
| Logic Function | OR, Shift Register |
| Direction | Unidirectional |
| Output Polarity | TRUE |
| Logic IC Type | PARALLEL IN SERIAL OUT |
| Trigger Type | POSITIVE EDGE |
| Number of Input Lines | 9 |
| Max Frequency@Nom-Sup | 25000000Hz |
| Length | 5mm |
| Width | 4.4mm |
| Radiation Hardening | No |
| RoHS Status | RoHS Compliant |
| Lead Free | Contains Lead |
SN74HC166PWE4 Overview
As a result, TSSOP package contains the embedded device. It sums up to 16 where the chip's terminations add up. There is a Rail/Tube case containing it. 5V is the part's operating supply voltage. There are 1 elements on this part. 16 pins are located on the device. The recommended mounting method is Surface Mount. Electronic components fall under the category of HC/UH. It is noted that this chip uses an operating supply voltage of 5V. Please take note of the following additional aspects of this section: SISO OPERATION ALSO AVAILABLE. In the device, there are 9 input lines that are available for use. There are 8 bits on the IC chip. In total, it has 16 pins. A temperature below 85°C is recommended for its use. In order for this device to function, the value should not be less than -40°C. A voltage of 6V is employed as the supply voltage. Voltages higher than 2V are used for this supply. In its subcategory, it is listed under Shift Registers.
SN74HC166PWE4 Features
With 16 pins
Operate supply voltage at 5V
SN74HC166PWE4 Applications
There are a lot of Texas Instruments SN74HC166PWE4 Shift Registers applications.
- Data manipulation
- store data in digital form
- temporary data storage
- ROM Chips
- LED matrix control
- 8-bit data storage
- Data Format Converters
- Output expansion
- Serial-to-parallel data conversion
- 7-segment display control