SN74HC165DBRE4
| Parameters | |
|---|---|
| Mount | Surface Mount |
| Package / Case | SSOP |
| Number of Pins | 16 |
| Weight | 130.010913mg |
| JESD-609 Code | e4 |
| Pbfree Code | yes |
| Moisture Sensitivity Level (MSL) | 1 |
| Number of Terminations | 16 |
| Terminal Finish | Nickel/Palladium/Gold (Ni/Pd/Au) |
| Max Operating Temperature | 85°C |
| Min Operating Temperature | -40°C |
| Additional Feature | SISO OPERATION ALSO AVAILABLE |
| Subcategory | Shift Registers |
| Technology | CMOS |
| Terminal Position | DUAL |
| Terminal Form | GULL WING |
| Peak Reflow Temperature (Cel) | 260 |
| Number of Functions | 1 |
| Supply Voltage | 5V |
| Terminal Pitch | 0.65mm |
| Pin Count | 16 |
| Operating Supply Voltage | 5V |
| Number of Elements | 1 |
| Temperature Grade | INDUSTRIAL |
| Max Supply Voltage | 6V |
| Min Supply Voltage | 2V |
| Number of Bits | 8 |
| Propagation Delay | 190 ns |
| Turn On Delay Time | 190 ns |
| Family | HC/UH |
| Logic Function | OR, Shift Register |
| Direction | Unidirectional |
| Output Polarity | COMPLEMENTARY |
| Logic IC Type | PARALLEL IN SERIAL OUT |
| Trigger Type | POSITIVE EDGE |
| Number of Input Lines | 9 |
| Max Frequency@Nom-Sup | 25000000Hz |
| Height Seated (Max) | 2mm |
| Length | 6.2mm |
| Width | 5.3mm |
| Radiation Hardening | No |
| RoHS Status | RoHS Compliant |
| Lead Free | Contains Lead |
SN74HC165DBRE4 Overview
SSOP is the package in which the device is embedded. Taking the total number of terminations on the chip and adding them up, we get 16. The part operates at 5V voltage. A total of 1 elements can be found on this part. 16 pins are present on the device. Using Surface Mount as a mount point is recommended. The electronic component belongs to the HC/UH. The operating supply voltage of this chip is noted to be within the range 5V. Additionally, this section contains the following: SISO OPERATION ALSO AVAILABLE. A device with 9 input lines is available. The total number of IC chip bits is 8. The total number of pins is 16. It should be used below 85°C. In order for this device to function, the value should not be less than -40°C. Under 6V, this voltage is employed. There is a voltage applied to the supply that is greater than 2V. In terms of its subcategory, it belongs to Shift Registers.
SN74HC165DBRE4 Features
With 16 pins
Operate supply voltage at 5V
SN74HC165DBRE4 Applications
There are a lot of Texas Instruments SN74HC165DBRE4 Shift Registers applications.
- Remote control holding register
- Cache memory in CPU
- Sequence generator
- Generate time delay toward digital circuits
- temporary data storage
- Dual-rank shift, hold, and bus applications
- Serial-to-parallel data conversion
- Remote control holding register
- Data manipulation
- Parallel to serial converter