SN74F299NSG4
| Parameters | |
|---|---|
| Mount | Surface Mount |
| Package / Case | SOP |
| Number of Pins | 20 |
| Weight | 266.712314mg |
| Max Operating Temperature | 70°C |
| Min Operating Temperature | 0°C |
| Operating Supply Voltage | 5V |
| Number of Elements | 1 |
| Number of Circuits | 1 |
| Max Supply Voltage | 5.5V |
| Min Supply Voltage | 4.5V |
| Number of Bits | 8 |
| Propagation Delay | 11 ns |
| Turn On Delay Time | 15 ns |
| Logic Function | Shift Register |
| Direction | Bidirectional |
| Number of Bits per Element | 8 |
| Number of Input Lines | 10 |
| Number of Output Lines | 10 |
| Radiation Hardening | No |
| RoHS Status | RoHS Compliant |
SN74F299NSG4 Overview
SOP package contains the device. 1 elements make up this part. 20 pins are provided on the device. It is recommended that the mount should be done by Surface Mount. As noted, this chip operates within the range of 5V. 10 input lines are available on the device. A total of 8 bits are present on the IC chip. It should be used below 70°C. For this device to operate, it cannot be lower than 0°C. Under 5.5V, this voltage is employed. It is used at a higher voltage than 4.5V. It is necessary to operate 10 output lines of the system. This device contains 1 circuits.
SN74F299NSG4 Features
With 20 pins
Operate supply voltage at 5V
With 10 output lines
SN74F299NSG4 Applications
There are a lot of Texas Instruments SN74F299NSG4 Shift Registers applications.
- Flash Memory
- temporary data storage
- LED matrix control
- Remote control holding register
- Delay Line
- Serial-to-parallel data conversion
- Serial-to-parallel data conversion
- Remote control holding register
- Pulse Extenders
- 7-segment display control