SN74F299DWRE4
| Parameters | |
|---|---|
| Power Supply Current-Max (ICC) | 95mA |
| Number of Input Lines | 10 |
| fmax-Min | 70 MHz |
| Max Frequency@Nom-Sup | 70000000Hz |
| Height Seated (Max) | 2.65mm |
| Width | 7.5mm |
| Radiation Hardening | No |
| RoHS Status | RoHS Compliant |
| Lead Free | Contains Lead |
| Mount | Surface Mount |
| Package / Case | SOIC |
| Number of Pins | 20 |
| Weight | 500.000539mg |
| Packaging | Tape and Reel |
| JESD-609 Code | e4 |
| Pbfree Code | yes |
| Moisture Sensitivity Level (MSL) | 1 |
| Number of Terminations | 20 |
| Terminal Finish | Nickel/Palladium/Gold (Ni/Pd/Au) |
| Max Operating Temperature | 70°C |
| Min Operating Temperature | 0°C |
| Additional Feature | HOLD MODE; COMMON I/O PINS; TOTEMPOLE SERIAL SHIFT RIGHT & SHIFT LEFT OUTPUTS; GATED OUTPUT CONTROL |
| Technology | TTL |
| Terminal Position | DUAL |
| Terminal Form | GULL WING |
| Peak Reflow Temperature (Cel) | 260 |
| Number of Functions | 1 |
| Supply Voltage | 5V |
| Pin Count | 20 |
| Operating Supply Voltage | 5V |
| Power Supplies | 5V |
| Temperature Grade | COMMERCIAL |
| Number of Circuits | 1 |
| Max Supply Voltage | 5.5V |
| Min Supply Voltage | 4.5V |
| Load Capacitance | 50pF |
| Number of Bits | 8 |
| Propagation Delay | 11 ns |
| Turn On Delay Time | 15 ns |
| Family | F/FAST |
| Logic Function | Shift Register |
| Direction | Bidirectional |
| Output Characteristics | 3-STATE |
| Output Polarity | TRUE |
| Logic IC Type | PARALLEL IN PARALLEL OUT |
| Trigger Type | POSITIVE EDGE |
SN74F299DWRE4 Overview
Embedded in a package of type SOIC, the device is available for use. Taking the total number of terminations on the chip and adding them up, we get 20. A Tape and Reel case holds it. The part operates at 5V voltage. Devices with 20 pins are available. It is recommended that the mount should be done by Surface Mount. It is a component of the F/FAST. This chip's operating supply voltage is reported as 5V. Additional aspects of this section include: HOLD MODE; COMMON I/O PINS; TOTEMPOLE SERIAL SHIFT RIGHT & SHIFT LEFT OUTPUTS; GATED OUTPUT CONTROL. This device has 10 input lines available. It can deliver voltage at 5V. There are 8 bits in the IC chip. The pin count is 20. Temperatures below 70°C are recommended for use. It should not be less than 0°C when operating this device. A voltage of 5.5V is employed as the supply voltage. It is used at a higher voltage than 4.5V. There are 1 circuits in this device.
SN74F299DWRE4 Features
With 20 pins
Operate supply voltage at 5V
It supplies 5V power
SN74F299DWRE4 Applications
There are a lot of Texas Instruments SN74F299DWRE4 Shift Registers applications.
- ROM Chips
- Counter
- Dual-rank shift, hold, and bus applications
- Data manipulation
- Pulse Extenders
- Remote control holding register
- Delay Line
- Data Processors
- Flash Memory
- Pseudo Random Pattern Generator