SN74ALS323NE4
| Parameters | |
|---|---|
| Mount | Through Hole |
| Package / Case | PDIP |
| Number of Pins | 20 |
| Weight | 1.200007g |
| Packaging | Rail/Tube |
| JESD-609 Code | e4 |
| Pbfree Code | yes |
| Number of Terminations | 20 |
| Terminal Finish | Nickel/Palladium/Gold (Ni/Pd/Au) |
| Max Operating Temperature | 70°C |
| Min Operating Temperature | 0°C |
| Additional Feature | HOLD MODE; COMMON I/O PINS; TOTEMPOLE SERIAL SHIFT RIGHT & SHIFT LEFT OUTPUTS; GATED OUTPUT CONTROL |
| Technology | TTL |
| Terminal Position | DUAL |
| Number of Functions | 1 |
| Supply Voltage | 5V |
| Terminal Pitch | 2.54mm |
| Pin Count | 20 |
| Operating Supply Voltage | 5V |
| Power Supplies | 5V |
| Temperature Grade | COMMERCIAL |
| Number of Circuits | 1 |
| Max Supply Voltage | 5.5V |
| Min Supply Voltage | 4.5V |
| Load Capacitance | 50pF |
| Number of Bits | 8 |
| Propagation Delay | 19 ns |
| Turn On Delay Time | 25 ns |
| Family | ALS |
| Logic Function | Shift Register |
| Direction | Bidirectional |
| Output Characteristics | 3-STATE |
| Output Polarity | TRUE |
| Logic IC Type | PARALLEL IN PARALLEL OUT |
| Trigger Type | POSITIVE EDGE |
| Number of Input Lines | 10 |
| Length | 24.325mm |
| Width | 7.62mm |
| Radiation Hardening | No |
| RoHS Status | RoHS Compliant |
| Lead Free | Contains Lead |
SN74ALS323NE4 Overview
PDIP package contains the device. Taking the total number of terminations on the chip and adding them up, we get 20. It is used to pack in Rail/Tube case. Its operating supply voltage is rated at 5V. 20 pins are provided on the device. It is recommended that the mount should be done by Through Hole. This electronic component is classified as ALS. As noted, this chip operates within the range of 5V. The following additional aspects of this section are worth noting: HOLD MODE; COMMON I/O PINS; TOTEMPOLE SERIAL SHIFT RIGHT & SHIFT LEFT OUTPUTS; GATED OUTPUT CONTROL. A device with 10 input lines is available. There is a possibility of delivering voltage at 5V. There are 8 bits in the IC chip. The total number of pins is 20. It should be used below 70°C. It should not be less than 0°C when operating this device. 5.5V is the supply voltage used. It is used at a higher voltage than 4.5V. This device contains 1 circuits.
SN74ALS323NE4 Features
With 20 pins
Operate supply voltage at 5V
It supplies 5V power
SN74ALS323NE4 Applications
There are a lot of Texas Instruments SN74ALS323NE4 Shift Registers applications.
- ROM Chips
- Pseudo Random Pattern Generator
- Cache memory in CPU
- store data in digital form
- Remote control holding register
- Serial-to-parallel data conversion
- Pattern Recognizers
- Serial-to-parallel data conversion
- Data Format Converters
- Sequence generator