SN74AHCT595PWG4
| Parameters | |
|---|---|
| Length | 5mm |
| Width | 4.4mm |
| Radiation Hardening | No |
| RoHS Status | RoHS Compliant |
| Lead Free | Lead Free |
| Mount | Surface Mount |
| Package / Case | TSSOP |
| Number of Pins | 16 |
| Weight | 61.887009mg |
| JESD-609 Code | e4 |
| Moisture Sensitivity Level (MSL) | 1 |
| Number of Terminations | 16 |
| Terminal Finish | Nickel/Palladium/Gold (Ni/Pd/Au) |
| Max Operating Temperature | 85°C |
| Min Operating Temperature | -40°C |
| Additional Feature | PARALLEL OUTPUT IS REGISTERED; UNREGISTERED SERIAL OUTPUT AVAILABLE |
| Technology | CMOS |
| Terminal Position | DUAL |
| Terminal Form | GULL WING |
| Peak Reflow Temperature (Cel) | 260 |
| Number of Functions | 1 |
| Supply Voltage | 5V |
| Pin Count | 16 |
| Operating Supply Voltage | 5V |
| Number of Elements | 1 |
| Power Supplies | 5V |
| Temperature Grade | INDUSTRIAL |
| Max Supply Voltage | 5.5V |
| Min Supply Voltage | 4.5V |
| Number of Bits | 8 |
| Propagation Delay | 10.2 ns |
| Turn On Delay Time | 12 ns |
| Family | AHCT/VHCT/VT |
| Logic Function | Shift Register |
| Direction | Unidirectional |
| Output Characteristics | 3-STATE |
| Output Polarity | TRUE |
| Logic IC Type | SERIAL IN PARALLEL OUT |
| Trigger Type | POSITIVE EDGE |
| Number of Output Lines | 9 |
| Height | 1.15mm |
SN74AHCT595PWG4 Overview
TSSOP is the package in which the device is embedded. 16 is the number of terminations on the chip. The part operates at 5V voltage. On this part, there are 1 elements. In this device, there are 16 pins. Using Surface Mount as a mount point is recommended. There is an electronic component in the AHCT/VHCT/VT. The operating supply voltage of this chip is noted to be within the range 5V. Additionally, this section contains the following: PARALLEL OUTPUT IS REGISTERED; UNREGISTERED SERIAL OUTPUT AVAILABLE. A device capable of delivering voltage at 5V can be used. A total of 8 bits are present on an IC chip. In total, it has 16 pins. The product should be used at temperatures below 85°C. In order for this device to function, the value should not be less than -40°C. Under 5.5V, this supply voltage is employed. It is important to note that this supply voltage is higher than 4.5V. Operating on 9 output lines is possible.
SN74AHCT595PWG4 Features
With 16 pins
Operate supply voltage at 5V
It supplies 5V power
With 9 output lines
SN74AHCT595PWG4 Applications
There are a lot of Texas Instruments SN74AHCT595PWG4 Shift Registers applications.
- Flash Memory
- LED matrix control
- Serial-to-parallel data conversion
- Generate time delay toward digital circuits
- Counter
- Data Processors
- Serial to parallel converter
- Remote control holding register
- data transfer
- Dual-rank shift, hold, and bus applications