SN74AHCT595PWE4
| Parameters | |
|---|---|
| Mount | Surface Mount |
| Package / Case | TSSOP |
| Number of Pins | 16 |
| Weight | 61.887009mg |
| Packaging | Rail/Tube |
| JESD-609 Code | e4 |
| Pbfree Code | yes |
| Moisture Sensitivity Level (MSL) | 1 |
| Number of Terminations | 16 |
| Terminal Finish | Nickel/Palladium/Gold (Ni/Pd/Au) |
| Max Operating Temperature | 85°C |
| Min Operating Temperature | -40°C |
| Additional Feature | PARALLEL OUTPUT IS REGISTERED; UNREGISTERED SERIAL OUTPUT AVAILABLE |
| Technology | CMOS |
| Terminal Position | DUAL |
| Terminal Form | GULL WING |
| Peak Reflow Temperature (Cel) | 260 |
| Number of Functions | 1 |
| Supply Voltage | 5V |
| Terminal Pitch | 0.65mm |
| Pin Count | 16 |
| Operating Supply Voltage | 5V |
| Number of Elements | 1 |
| Power Supplies | 5V |
| Temperature Grade | INDUSTRIAL |
| Max Supply Voltage | 5.5V |
| Min Supply Voltage | 4.5V |
| Number of Bits | 8 |
| Propagation Delay | 10.2 ns |
| Turn On Delay Time | 12 ns |
| Family | AHCT/VHCT/VT |
| Logic Function | Shift Register |
| Direction | Unidirectional |
| Output Characteristics | 3-STATE |
| Output Polarity | TRUE |
| Logic IC Type | SERIAL IN PARALLEL OUT |
| Trigger Type | POSITIVE EDGE |
| Number of Output Lines | 9 |
| Length | 5mm |
| Width | 4.4mm |
| Radiation Hardening | No |
| RoHS Status | RoHS Compliant |
| Lead Free | Contains Lead |
SN74AHCT595PWE4 Overview
Embedded in a package of type TSSOP, the device is available for use. 16 is the sum of the number of terminations in the chip. A Rail/Tube case holds it. This part has an operating supply voltage of 5V. On this part, there are 1 elements. The device is equipped with 16 pins. It is recommended to mount by Surface Mount in order to get the best results. This electronic component is classified as AHCT/VHCT/VT. This chip's operating supply voltage is reported as 5V. Additional aspects of this section are as follows: PARALLEL OUTPUT IS REGISTERED; UNREGISTERED SERIAL OUTPUT AVAILABLE. Voltage can be delivered at 5V by the device. A total of 8 bits are present on the IC chip. The total number of pins is 16. It is recommended that it be used at temperatures below 85°C. This device should not be operated with a value lower than -40°C. A voltage of this type is employed under 5.5V. Voltages higher than 4.5V are used for this supply. There are 9 output lines to operate.
SN74AHCT595PWE4 Features
With 16 pins
Operate supply voltage at 5V
It supplies 5V power
With 9 output lines
SN74AHCT595PWE4 Applications
There are a lot of Texas Instruments SN74AHCT595PWE4 Shift Registers applications.
- Data manipulation
- Pulse Extenders
- Parallel to serial converter
- 7-segment display control
- Pseudo Random Pattern Generator
- Remote control holding register
- Dual-rank shift, hold, and bus applications
- Serial-to-parallel data conversion
- Serial to parallel converter
- ROM Chips