SN74AHCT595DBRG4
| Parameters | |
|---|---|
| Packaging | Tape and Reel |
| JESD-609 Code | e4 |
| Pbfree Code | yes |
| Moisture Sensitivity Level (MSL) | 1 |
| Number of Terminations | 16 |
| Terminal Finish | Nickel/Palladium/Gold (Ni/Pd/Au) |
| Max Operating Temperature | 85°C |
| Min Operating Temperature | -40°C |
| Additional Feature | PARALLEL OUTPUT IS REGISTERED; UNREGISTERED SERIAL OUTPUT AVAILABLE |
| Technology | CMOS |
| Terminal Position | DUAL |
| Terminal Form | GULL WING |
| Peak Reflow Temperature (Cel) | 260 |
| Number of Functions | 1 |
| Supply Voltage | 5V |
| Terminal Pitch | 0.65mm |
| Pin Count | 16 |
| Operating Supply Voltage | 5V |
| Number of Elements | 1 |
| Power Supplies | 5V |
| Temperature Grade | INDUSTRIAL |
| Max Supply Voltage | 5.5V |
| Min Supply Voltage | 4.5V |
| Number of Bits | 8 |
| Propagation Delay | 10.2 ns |
| Turn On Delay Time | 12 ns |
| Family | AHCT/VHCT/VT |
| Logic Function | Shift Register |
| Direction | Unidirectional |
| Output Characteristics | 3-STATE |
| Output Polarity | TRUE |
| Logic IC Type | SERIAL IN PARALLEL OUT |
| Trigger Type | POSITIVE EDGE |
| Number of Output Lines | 9 |
| Height Seated (Max) | 2mm |
| Length | 6.2mm |
| Width | 5.3mm |
| Radiation Hardening | No |
| RoHS Status | RoHS Compliant |
| Lead Free | Contains Lead |
| Mount | Surface Mount |
| Package / Case | SSOP |
| Number of Pins | 16 |
| Weight | 128.593437mg |
SN74AHCT595DBRG4 Overview
As a result, SSOP package contains the embedded device. 16 is the total number of terminations on the chip. A Tape and Reel case is used to pack it. Voltage rating of the part is 5V. There are 1 elements on this part. In this device, there are 16 pins. It is recommended to mount by Surface Mount. Electronic components belong to the AHCT/VHCT/VT group. It is noted that the operating supply voltage of this chip falls within the range 5V. Additional aspects of this section are as follows: PARALLEL OUTPUT IS REGISTERED; UNREGISTERED SERIAL OUTPUT AVAILABLE. A voltage of 5V can be delivered by it. It has a total of 8 pins. The pin count is 16. The product should be used at temperatures below 85°C. Ideally, it should not fall below -40°C. Under 5.5V, this supply voltage is employed. It is used at a voltage greater than 4.5V. There are 9 output lines to operate.
SN74AHCT595DBRG4 Features
With 16 pins
Operate supply voltage at 5V
It supplies 5V power
With 9 output lines
SN74AHCT595DBRG4 Applications
There are a lot of Texas Instruments SN74AHCT595DBRG4 Shift Registers applications.
- Output expansion
- Pulse Extenders
- store data in digital form
- Remote control holding register
- Flash Memory
- Data Format Converters
- Serial-to-parallel data conversion
- 8-bit data storage
- Data manipulation
- Interconnectors