SN74AHCT595DBRE4
| Parameters | |
|---|---|
| Mount | Surface Mount |
| Package / Case | SSOP |
| Number of Pins | 16 |
| Weight | 130.010913mg |
| Packaging | Tape and Reel |
| JESD-609 Code | e4 |
| Pbfree Code | yes |
| Moisture Sensitivity Level (MSL) | 1 |
| Number of Terminations | 16 |
| Terminal Finish | Nickel/Palladium/Gold (Ni/Pd/Au) |
| Max Operating Temperature | 85°C |
| Min Operating Temperature | -40°C |
| Additional Feature | PARALLEL OUTPUT IS REGISTERED; UNREGISTERED SERIAL OUTPUT AVAILABLE |
| Technology | CMOS |
| Terminal Position | DUAL |
| Terminal Form | GULL WING |
| Peak Reflow Temperature (Cel) | 260 |
| Number of Functions | 1 |
| Supply Voltage | 5V |
| Terminal Pitch | 0.65mm |
| Pin Count | 16 |
| Operating Supply Voltage | 5V |
| Number of Elements | 1 |
| Power Supplies | 5V |
| Temperature Grade | INDUSTRIAL |
| Max Supply Voltage | 5.5V |
| Min Supply Voltage | 4.5V |
| Number of Bits | 8 |
| Propagation Delay | 10.2 ns |
| Turn On Delay Time | 12 ns |
| Family | AHCT/VHCT/VT |
| Logic Function | Shift Register |
| Direction | Unidirectional |
| Output Characteristics | 3-STATE |
| Output Polarity | TRUE |
| Logic IC Type | SERIAL IN PARALLEL OUT |
| Trigger Type | POSITIVE EDGE |
| Number of Output Lines | 9 |
| Height Seated (Max) | 2mm |
| Length | 6.2mm |
| Width | 5.3mm |
| Radiation Hardening | No |
| RoHS Status | RoHS Compliant |
| Lead Free | Contains Lead |
SN74AHCT595DBRE4 Overview
In package SSOP, there is an embedded device. 16 is the sum of the number of terminations in the chip. It is packed in a case number Tape and Reel. There is 5V operating supply voltage listed on the part. On this part, there are 1 elements. It has 16 pins. Surface Mount is recommended for mounting. It is a component of the AHCT/VHCT/VT. A range of 5V is noted as the operating supply voltage of this chip. Additionally, this section contains the following: PARALLEL OUTPUT IS REGISTERED; UNREGISTERED SERIAL OUTPUT AVAILABLE. A voltage of 5V is possible with this device. The total number of IC chip bits is 8. 16 pins are on it. It is recommended that it be used at temperatures below 85°C. For this device to operate, it cannot be lower than -40°C. A voltage of 5.5V is used to supply this voltage. This supply voltage is employed higher than 4.5V. There are 9 output lines to operate.
SN74AHCT595DBRE4 Features
With 16 pins
Operate supply voltage at 5V
It supplies 5V power
With 9 output lines
SN74AHCT595DBRE4 Applications
There are a lot of Texas Instruments SN74AHCT595DBRE4 Shift Registers applications.
- Serial to parallel converter
- Data Processors
- data manipulation
- temporary data storage
- 8-bit data storage
- Interconnectors
- Flash Memory
- Generate time delay toward digital circuits
- Data manipulation
- Data Format Converters