SN74AHCT595D
| Parameters | |
|---|---|
| Factory Lead Time | 6 Weeks |
| Lifecycle Status | ACTIVE (Last Updated: 6 days ago) |
| Mount | Surface Mount |
| Mounting Type | Surface Mount |
| Package / Case | 16-SOIC (0.154, 3.90mm Width) |
| Number of Pins | 16 |
| Weight | 141.690917mg |
| Operating Temperature | -40°C~85°C |
| Packaging | Tube |
| Series | 74AHCT |
| JESD-609 Code | e4 |
| Pbfree Code | yes |
| Part Status | Active |
| Moisture Sensitivity Level (MSL) | 1 (Unlimited) |
| Number of Terminations | 16 |
| Terminal Finish | Nickel/Palladium/Gold (Ni/Pd/Au) |
| Additional Feature | PARALLEL OUTPUT IS REGISTERED; UNREGISTERED SERIAL OUTPUT AVAILABLE |
| Technology | CMOS |
| Voltage - Supply | 4.5V~5.5V |
| Terminal Position | DUAL |
| Terminal Form | GULL WING |
| Peak Reflow Temperature (Cel) | 260 |
| Supply Voltage | 5V |
| Frequency | 170MHz |
| Base Part Number | 74AHCT595 |
| Function | Serial to Parallel, Serial |
| Output Type | Tri-State |
| Operating Supply Voltage | 5V |
| Power Supplies | 5V |
| Load Capacitance | 50pF |
| Propagation Delay | 12 ns |
| Turn On Delay Time | 12 ns |
| Family | AHCT/VHCT/VT |
| Logic Function | Shift Register |
| Direction | Unidirectional |
| Output Characteristics | 3-STATE |
| Logic Type | Shift Register |
| Output Polarity | TRUE |
| Number of Bits per Element | 8 |
| Trigger Type | POSITIVE EDGE |
| Schmitt Trigger | No |
| Power Supply Current-Max (ICC) | 0.04mA |
| Number of Input Lines | 1 |
| Input Current | 1μA |
| Number of Output Lines | 9 |
| Height | 1.75mm |
| Length | 9.9mm |
| Width | 3.91mm |
| Thickness | 1.58mm |
| Radiation Hardening | No |
| REACH SVHC | No SVHC |
| RoHS Status | ROHS3 Compliant |
| Lead Free | Lead Free |
SN74AHCT595D Overview
The device is embedded in 16-SOIC (0.154, 3.90mm Width) package. There are 16 terminations on the chip. The case Tube contains it. Parts with a 5V operating supply voltage are specified. 16 pins are located on the device. Surface Mount is recommended for mounting. The electronic component belongs to the AHCT/VHCT/VT. Mounted in the same way as Surface Mount. There is a temperature range of -40°C~85°C. Votage within the range of 4.5V~5.5V is supplied. The 74AHCT series is associated with this electrical component. With 74AHCT595 family search, you can find similar parts. It is noted that the operating supply voltage of this chip falls within the range 5V. The following additional elements are important to note: PARALLEL OUTPUT IS REGISTERED; UNREGISTERED SERIAL OUTPUT AVAILABLE. In the device, there are 1 input lines that are available for use. Devices with voltage delivery capabilities of 5V are available. It is necessary to operate 9 output lines. The device runs its frequency at 170MHz.
SN74AHCT595D Features
With 16 pins
Mounted in Surface Mount type.
Based on 74AHCT595 family
Operate supply voltage at 5V
It supplies 5V power
With 9 output lines
SN74AHCT595D Applications
There are a lot of Texas Instruments SN74AHCT595D Shift Registers applications.
- store data in digital form
- Serial-to-parallel data conversion
- Data Processors
- Pulse Extenders
- temporary data storage
- Flash Memory
- LED matrix control
- Cache memory in CPU
- Serial-to-parallel data conversion
- Delay Line