SN74AHCT594PWG4
| Parameters | |
|---|---|
| Mount | Surface Mount |
| Package / Case | TSSOP |
| Number of Pins | 16 |
| Weight | 61.887009mg |
| JESD-609 Code | e4 |
| Moisture Sensitivity Level (MSL) | 1 |
| Number of Terminations | 16 |
| Terminal Finish | Nickel/Palladium/Gold (Ni/Pd/Au) |
| Max Operating Temperature | 125°C |
| Min Operating Temperature | -40°C |
| Additional Feature | PARALLEL OUTPUT IS REGISTERED |
| Technology | CMOS |
| Terminal Position | DUAL |
| Terminal Form | GULL WING |
| Peak Reflow Temperature (Cel) | 260 |
| Number of Functions | 1 |
| Supply Voltage | 5V |
| Pin Count | 16 |
| Operating Supply Voltage | 5V |
| Number of Elements | 1 |
| Power Supplies | 5V |
| Temperature Grade | AUTOMOTIVE |
| Max Supply Voltage | 5.5V |
| Min Supply Voltage | 4.5V |
| Number of Bits | 8 |
| Propagation Delay | 9.2 ns |
| Turn On Delay Time | 10.7 ns |
| Family | AHCT/VHCT/VT |
| Logic Function | Shift Register |
| Direction | Unidirectional |
| Output Polarity | TRUE |
| Logic IC Type | SERIAL IN PARALLEL OUT |
| Trigger Type | POSITIVE EDGE |
| Number of Output Lines | 9 |
| Height | 1.15mm |
| Length | 5mm |
| Width | 4.4mm |
| Radiation Hardening | No |
| RoHS Status | RoHS Compliant |
| Lead Free | Lead Free |
SN74AHCT594PWG4 Overview
Embedded in a package of type TSSOP, the device is available for use. The number of the chip's terminations sums up to 16. The part operates at 5V voltage. 1 elements make up this part. There are 16 pins on the device. The mounting method should be Surface Mount. Electronic components fall under the category of AHCT/VHCT/VT. In terms of supply voltage, this chip operates within the range of 5V. This section has the following additional features: PARALLEL OUTPUT IS REGISTERED. A voltage of 5V can be delivered by it. It has a total of 8 pins. The pin count is 16. Temperatures below 125°C are recommended for use. In order for this device to function, the value should not be less than -40°C. We use this supply voltage under 5.5V. It is important to note that this supply voltage is higher than 4.5V. A total of 9 output lines are available for operation.
SN74AHCT594PWG4 Features
With 16 pins
Operate supply voltage at 5V
It supplies 5V power
With 9 output lines
SN74AHCT594PWG4 Applications
There are a lot of Texas Instruments SN74AHCT594PWG4 Shift Registers applications.
- Counter
- Pulse Extenders
- Cache memory in CPU
- Pattern Recognizers
- Output expansion
- Remote control holding register
- 8-bit data storage
- Interconnectors
- Delay Line
- store data in digital form