SN74AHCT594PWE4
| Parameters | |
|---|---|
| Mount | Surface Mount |
| Package / Case | TSSOP |
| Number of Pins | 16 |
| Weight | 59.987591mg |
| JESD-609 Code | e4 |
| Pbfree Code | yes |
| Moisture Sensitivity Level (MSL) | 1 |
| Number of Terminations | 16 |
| Terminal Finish | Nickel/Palladium/Gold (Ni/Pd/Au) |
| Max Operating Temperature | 85°C |
| Min Operating Temperature | -40°C |
| Additional Feature | PARALLEL OUTPUT IS REGISTERED |
| Technology | CMOS |
| Terminal Position | DUAL |
| Terminal Form | GULL WING |
| Peak Reflow Temperature (Cel) | 260 |
| Number of Functions | 1 |
| Supply Voltage | 5V |
| Terminal Pitch | 0.65mm |
| Pin Count | 16 |
| Operating Supply Voltage | 5V |
| Number of Elements | 1 |
| Power Supplies | 5V |
| Temperature Grade | INDUSTRIAL |
| Max Supply Voltage | 5.5V |
| Min Supply Voltage | 4.5V |
| Number of Bits | 8 |
| Propagation Delay | 9.2 ns |
| Turn On Delay Time | 10.7 ns |
| Family | AHCT/VHCT/VT |
| Logic Function | Shift Register |
| Direction | Unidirectional |
| Output Polarity | TRUE |
| Logic IC Type | SERIAL IN PARALLEL OUT |
| Trigger Type | POSITIVE EDGE |
| Number of Output Lines | 9 |
| Length | 5mm |
| Width | 4.4mm |
| Radiation Hardening | No |
| RoHS Status | RoHS Compliant |
| Lead Free | Contains Lead |
SN74AHCT594PWE4 Overview
TSSOP package contains the device. 16 is the total number of terminations on the chip. 5V is the operating supply voltage of the part. It is a part that has 1 elements on it. 16 pins are available on the device. It is recommended to mount by Surface Mount in order to get the best results. Electronic components fall under the category of AHCT/VHCT/VT. 5V is noted as the operating supply voltage of this chip. Additional aspects of this section include: PARALLEL OUTPUT IS REGISTERED. There is a possibility of delivering voltage at 5V. It has 8 bits in total. 16 pins are on it. Under 85°C, it is recommended that it be used. This device should not be operated below -40°C. We use this supply voltage under 5.5V. It is used at a voltage greater than 4.5V. There are 9 output lines to operate.
SN74AHCT594PWE4 Features
With 16 pins
Operate supply voltage at 5V
It supplies 5V power
With 9 output lines
SN74AHCT594PWE4 Applications
There are a lot of Texas Instruments SN74AHCT594PWE4 Shift Registers applications.
- Counter
- Parallel to serial converter
- Flash Memory
- Output expansion
- Cache memory in CPU
- data manipulation
- Remote control holding register
- Interconnectors
- temporary data storage
- Serial-to-parallel data conversion