SN74AHCT594NE4
| Parameters | |
|---|---|
| Mount | Through Hole |
| Package / Case | PDIP |
| Number of Pins | 16 |
| Weight | 959.999902mg |
| JESD-609 Code | e4 |
| Pbfree Code | yes |
| Number of Terminations | 16 |
| Terminal Finish | Nickel/Palladium/Gold (Ni/Pd/Au) |
| Max Operating Temperature | 85°C |
| Min Operating Temperature | -40°C |
| Additional Feature | PARALLEL OUTPUT IS REGISTERED |
| Technology | CMOS |
| Terminal Position | DUAL |
| Number of Functions | 1 |
| Supply Voltage | 5V |
| Terminal Pitch | 2.54mm |
| Pin Count | 16 |
| Operating Supply Voltage | 5V |
| Number of Elements | 1 |
| Power Supplies | 5V |
| Temperature Grade | INDUSTRIAL |
| Max Supply Voltage | 5.5V |
| Min Supply Voltage | 4.5V |
| Number of Bits | 8 |
| Propagation Delay | 9.2 ns |
| Turn On Delay Time | 10.7 ns |
| Family | AHCT/VHCT/VT |
| Logic Function | Shift Register |
| Direction | Unidirectional |
| Output Polarity | TRUE |
| Logic IC Type | SERIAL IN PARALLEL OUT |
| Trigger Type | POSITIVE EDGE |
| Number of Output Lines | 9 |
| Width | 7.62mm |
| Radiation Hardening | No |
| RoHS Status | RoHS Compliant |
| Lead Free | Contains Lead |
SN74AHCT594NE4 Overview
PDIP is the package in which the device is embedded. 16 is the sum of the number of terminations in the chip. 5V is the operating supply voltage of the part. 1 elements are present in this part. In this device, there are 16 pins. It is recommended that the mount should be done by Through Hole. This electronic component is classified as AHCT/VHCT/VT. According to the specification, this chip's operating supply voltage falls within the range of 5V. Additionally, this section contains the following: PARALLEL OUTPUT IS REGISTERED. Voltage can be delivered at 5V by the device. A total of 8 bits are present on the IC chip. 16 pins are present on it. It is recommended that it be used at temperatures below 85°C. This device should not be operated with a value lower than -40°C. This supply voltage is employed under 5.5V. There is a voltage applied to the supply that is greater than 4.5V. The number of output lines to be operated is 9.
SN74AHCT594NE4 Features
With 16 pins
Operate supply voltage at 5V
It supplies 5V power
With 9 output lines
SN74AHCT594NE4 Applications
There are a lot of Texas Instruments SN74AHCT594NE4 Shift Registers applications.
- Counter
- Output expansion
- 8-bit data storage
- data transfer
- Parallel data
- Cache memory in CPU
- Pseudo Random Pattern Generator
- Delay Line
- Serial to parallel converter
- data manipulation