SN74AHC595PWG4
| Parameters | |
|---|---|
| Mount | Surface Mount |
| Package / Case | TSSOP |
| Number of Pins | 16 |
| Weight | 59.987591mg |
| Packaging | Rail/Tube |
| JESD-609 Code | e4 |
| Moisture Sensitivity Level (MSL) | 1 |
| Number of Terminations | 16 |
| Terminal Finish | Nickel/Palladium/Gold (Ni/Pd/Au) |
| Max Operating Temperature | 125°C |
| Min Operating Temperature | -40°C |
| Additional Feature | PARALLEL OUTPUT IS REGISTERED; UNREGISTERED SERIAL OUTPUT AVAILABLE |
| Technology | CMOS |
| Terminal Position | DUAL |
| Terminal Form | GULL WING |
| Peak Reflow Temperature (Cel) | 260 |
| Number of Functions | 1 |
| Supply Voltage | 3.3V |
| Terminal Pitch | 0.65mm |
| Pin Count | 16 |
| Operating Supply Voltage | 5V |
| Number of Elements | 1 |
| Temperature Grade | AUTOMOTIVE |
| Max Supply Voltage | 5.5V |
| Min Supply Voltage | 2V |
| Number of Bits | 8 |
| Propagation Delay | 10.2 ns |
| Turn On Delay Time | 18.5 ns |
| Family | AHC/VHC/H/U/V |
| Logic Function | Shift Register |
| Direction | Unidirectional |
| Output Characteristics | 3-STATE |
| Output Polarity | TRUE |
| Logic IC Type | SERIAL IN PARALLEL OUT |
| Trigger Type | POSITIVE EDGE |
| Number of Output Lines | 9 |
| Length | 5mm |
| Width | 4.4mm |
| Radiation Hardening | No |
| RoHS Status | RoHS Compliant |
| Lead Free | Lead Free |
SN74AHC595PWG4 Overview
There is an embedded device in the package TSSOP. There are 16 terminations on the chip. Rail/Tube is the case in which it is packed. There is 3.3V operating supply voltage listed on the part. There are 1 elements on this part. Devices with 16 pins are available. Surface Mount is recommended for mounting. In this case, the electronic component belongs to the AHC/VHC/H/U/V. 5V is noted as the operating supply voltage of this chip. Additional aspects of this section include: PARALLEL OUTPUT IS REGISTERED; UNREGISTERED SERIAL OUTPUT AVAILABLE. IC chip bits total 8. 16 pins are on it. This product should not be used at temperatures above 125°C. It should not be less than -40°C when operating this device. A voltage of this type is employed under 5.5V. This supply voltage is employed higher than 2V. A total of 9 output lines are available for operation.
SN74AHC595PWG4 Features
With 16 pins
Operate supply voltage at 5V
With 9 output lines
SN74AHC595PWG4 Applications
There are a lot of Texas Instruments SN74AHC595PWG4 Shift Registers applications.
- Output expansion
- Pulse Extenders
- temporary data storage
- Sequence generator
- Remote control holding register
- Pattern Recognizers
- Serial-to-parallel data conversion
- Cache memory in CPU
- Serial to parallel converter
- Flash Memory