SN74AHC595D
| Parameters | |
|---|---|
| Part Status | Active |
| Moisture Sensitivity Level (MSL) | 1 (Unlimited) |
| Number of Terminations | 16 |
| Terminal Finish | Nickel/Palladium/Gold (Ni/Pd/Au) |
| Additional Feature | PARALLEL OUTPUT IS REGISTERED; UNREGISTERED SERIAL OUTPUT AVAILABLE |
| Technology | CMOS |
| Voltage - Supply | 2V~5.5V |
| Terminal Position | DUAL |
| Terminal Form | GULL WING |
| Peak Reflow Temperature (Cel) | 260 |
| Supply Voltage | 3.3V |
| Frequency | 115MHz |
| Base Part Number | 74AHC595 |
| Function | Serial to Parallel, Serial |
| Output Type | Tri-State |
| Supply Voltage-Max (Vsup) | 5.5V |
| Power Supplies | 2/5.5V |
| Supply Voltage-Min (Vsup) | 2V |
| Load Capacitance | 50pF |
| Propagation Delay | 10.2 ns |
| Turn On Delay Time | 18.5 ns |
| Family | AHC/VHC/H/U/V |
| Logic Function | Shift Register |
| Direction | Unidirectional |
| Output Characteristics | 3-STATE |
| Logic Type | Shift Register |
| Output Polarity | TRUE |
| Max I(ol) | 0.05 A |
| Number of Bits per Element | 8 |
| Trigger Type | POSITIVE EDGE |
| Schmitt Trigger | No |
| Power Supply Current-Max (ICC) | 0.04mA |
| Number of Input Lines | 1 |
| Input Current | 40μA |
| Number of Output Lines | 9 |
| Height | 1.75mm |
| Length | 9.9mm |
| Width | 3.91mm |
| Thickness | 1.58mm |
| Radiation Hardening | No |
| REACH SVHC | No SVHC |
| RoHS Status | ROHS3 Compliant |
| Lead Free | Lead Free |
| Factory Lead Time | 6 Weeks |
| Lifecycle Status | ACTIVE (Last Updated: 1 week ago) |
| Mount | Surface Mount |
| Mounting Type | Surface Mount |
| Package / Case | 16-SOIC (0.154, 3.90mm Width) |
| Number of Pins | 16 |
| Weight | 141.690917mg |
| Operating Temperature | -40°C~125°C |
| Packaging | Tube |
| Series | 74AHC |
| JESD-609 Code | e4 |
| Pbfree Code | yes |
SN74AHC595D Overview
This device can be found embedded within the package 16-SOIC (0.154, 3.90mm Width). It sums up to 16 where the chip's terminations add up. It is used to pack in Tube case. The part's operating supply voltage is rated 3.3V. 16 pins are available on the device. The mounting method should be Surface Mount. There is an electronic component in the AHC/VHC/H/U/V. The component is positioned in the way of Surface Mount. Operating temperatures are within the range of -40°C~125°C. There is a votage of 2V~5.5V provided with it. 74AHC is the series number of this electrical component. Similar parts can be found using the 74AHC595 family. This section has the following additional features: PARALLEL OUTPUT IS REGISTERED; UNREGISTERED SERIAL OUTPUT AVAILABLE. The minimum supply voltage (Vsup) for this part should not be less than 2V. This device has 1 input lines available. A voltage of 2/5.5V is possible with this device. The maximum supply voltage (Vsup) for this part should not be more than 5.5V. Operation is available on only 9 output lines. 115MHz is the device's frequency.
SN74AHC595D Features
With 16 pins
Mounted in Surface Mount type.
Based on 74AHC595 family
It supplies 2/5.5V power
With 9 output lines
SN74AHC595D Applications
There are a lot of Texas Instruments SN74AHC595D Shift Registers applications.
- Pseudo Random Pattern Generator
- Remote control holding register
- Pattern Recognizers
- Generate time delay toward digital circuits
- Output expansion
- Flash Memory
- 8-bit data storage
- Dual-rank shift, hold, and bus applications
- temporary data storage
- Serial-to-parallel data conversion