SN74AHC594NE4
| Parameters | |
|---|---|
| Mount | Through Hole |
| Package / Case | PDIP |
| Number of Pins | 16 |
| Weight | 951.693491mg |
| JESD-609 Code | e4 |
| Pbfree Code | yes |
| Number of Terminations | 16 |
| Terminal Finish | Nickel/Palladium/Gold (Ni/Pd/Au) |
| Max Operating Temperature | 125°C |
| Min Operating Temperature | -40°C |
| Additional Feature | PARALLEL OUTPUT IS REGISTERED; UNREGISTERED SERIAL OUTPUT AVAILABLE |
| Technology | CMOS |
| Terminal Position | DUAL |
| Peak Reflow Temperature (Cel) | NOT SPECIFIED |
| Number of Functions | 1 |
| Supply Voltage | 3.3V |
| Terminal Pitch | 2.54mm |
| Time@Peak Reflow Temperature-Max (s) | NOT SPECIFIED |
| Pin Count | 16 |
| Qualification Status | Not Qualified |
| Operating Supply Voltage | 5V |
| Number of Elements | 1 |
| Power Supplies | 2/6V |
| Temperature Grade | AUTOMOTIVE |
| Max Supply Voltage | 5.5V |
| Min Supply Voltage | 2V |
| Number of Bits | 8 |
| Propagation Delay | 9.2 ns |
| Turn On Delay Time | 14.4 ns |
| Family | AHC/VHC/H/U/V |
| Logic Function | Shift Register |
| Direction | Unidirectional |
| Output Polarity | TRUE |
| Logic IC Type | SERIAL IN PARALLEL OUT |
| Trigger Type | POSITIVE EDGE |
| Number of Output Lines | 9 |
| Width | 7.62mm |
| RoHS Status | RoHS Compliant |
| Lead Free | Lead Free |
SN74AHC594NE4 Overview
PDIP is the package in which the device is embedded. Taking the total number of terminations on the chip and adding them up, we get 16. This part has an operating supply voltage of 3.3V. A total of 1 elements are present on this part. 16 pins are present on the device. As a general recommendation, mounting by Through Hole is recommended. There is an electronic component in the AHC/VHC/H/U/V. As noted, this chip operates within the range of 5V. Additional aspects of this section are as follows: PARALLEL OUTPUT IS REGISTERED; UNREGISTERED SERIAL OUTPUT AVAILABLE. There is a capability to deliver voltage at 2/6V. A total of 8 bits are present on the IC chip. 16 pins are on it. Under 125°C, it is recommended that it be used. In order to operate the device, the value should not fall below -40°C. It is employed under the condition of 5.5V. It is necessary to use a voltage that is higher than 2V to provide this supply. There are 9 output lines to operate.
SN74AHC594NE4 Features
With 16 pins
Operate supply voltage at 5V
It supplies 2/6V power
With 9 output lines
SN74AHC594NE4 Applications
There are a lot of Texas Instruments SN74AHC594NE4 Shift Registers applications.
- Pseudo Random Pattern Generator
- 8-bit data storage
- Data Processors
- 7-segment display control
- Parallel data
- Flash Memory
- Counter
- Remote control holding register
- Output expansion
- Interconnectors