SN74AHC594DBRE4
| Parameters | |
|---|---|
| Mount | Surface Mount |
| Package / Case | SSOP |
| Number of Pins | 16 |
| Weight | 130.010913mg |
| Packaging | Tape & Reel (TR) |
| JESD-609 Code | e4 |
| Pbfree Code | yes |
| Moisture Sensitivity Level (MSL) | 1 |
| Number of Terminations | 16 |
| Terminal Finish | Nickel/Palladium/Gold (Ni/Pd/Au) |
| Max Operating Temperature | 85°C |
| Min Operating Temperature | -40°C |
| Additional Feature | PARALLEL OUTPUT IS REGISTERED; UNREGISTERED SERIAL OUTPUT AVAILABLE |
| Technology | CMOS |
| Terminal Position | DUAL |
| Terminal Form | GULL WING |
| Peak Reflow Temperature (Cel) | 260 |
| Number of Functions | 1 |
| Supply Voltage | 3.3V |
| Terminal Pitch | 0.65mm |
| Pin Count | 16 |
| Operating Supply Voltage | 5V |
| Number of Elements | 1 |
| Power Supplies | 2/6V |
| Temperature Grade | INDUSTRIAL |
| Max Supply Voltage | 5.5V |
| Min Supply Voltage | 2V |
| Number of Bits | 8 |
| Propagation Delay | 9.2 ns |
| Turn On Delay Time | 14.4 ns |
| Family | AHC/VHC/H/U/V |
| Logic Function | Shift Register |
| Direction | Unidirectional |
| Output Polarity | TRUE |
| Logic IC Type | SERIAL IN PARALLEL OUT |
| Trigger Type | POSITIVE EDGE |
| Number of Output Lines | 9 |
| Height Seated (Max) | 2mm |
| Length | 6.2mm |
| Width | 5.3mm |
| Radiation Hardening | No |
| RoHS Status | RoHS Compliant |
| Lead Free | Contains Lead |
SN74AHC594DBRE4 Overview
The device is embedded in SSOP package. 16 is the total number of terminations on the chip. The Tape & Reel (TR) case contains it. This part has an operating supply voltage of 3.3V. On this part, there are 1 elements. The device is equipped with 16 pins. Surface Mount is recommended for mounting. Electronic components belong to the AHC/VHC/H/U/V group. It is noted that this chip uses an operating supply voltage of 5V. Please take note of the following additional aspects of this section: PARALLEL OUTPUT IS REGISTERED; UNREGISTERED SERIAL OUTPUT AVAILABLE. The device is capable of delivering voltage at 2/6V. There are 8 bits on the IC chip. There are a total of 16 pins on it. Under 85°C, it is recommended that it be used. This device should not be operated below -40°C. This supply voltage is employed under 5.5V. The supply voltage is higher than 2V. It is necessary to operate 9 output lines of the system.
SN74AHC594DBRE4 Features
With 16 pins
Operate supply voltage at 5V
It supplies 2/6V power
With 9 output lines
SN74AHC594DBRE4 Applications
There are a lot of Texas Instruments SN74AHC594DBRE4 Shift Registers applications.
- store data in digital form
- Pulse Extenders
- ROM Chips
- data transfer
- Cache memory in CPU
- Sequence generator
- Remote control holding register
- Data Format Converters
- 8-bit data storage
- Interconnectors