SN74AHC574N
| Parameters | |
|---|---|
| Thickness | 4.57mm |
| Radiation Hardening | No |
| REACH SVHC | No SVHC |
| RoHS Status | ROHS3 Compliant |
| Lead Free | Lead Free |
| Factory Lead Time | 6 Weeks |
| Lifecycle Status | ACTIVE (Last Updated: 6 days ago) |
| Mount | Through Hole |
| Mounting Type | Through Hole |
| Package / Case | 20-DIP (0.300, 7.62mm) |
| Number of Pins | 20 |
| Weight | 1.1991g |
| Operating Temperature | -40°C~85°C TA |
| Packaging | Tube |
| Series | 74AHC |
| JESD-609 Code | e4 |
| Pbfree Code | yes |
| Part Status | Active |
| Moisture Sensitivity Level (MSL) | 1 (Unlimited) |
| Number of Terminations | 20 |
| ECCN Code | EAR99 |
| Type | D-Type |
| Terminal Finish | Nickel/Palladium/Gold (Ni/Pd/Au) |
| Subcategory | FF/Latches |
| Technology | CMOS |
| Voltage - Supply | 2V~5.5V |
| Terminal Position | DUAL |
| Supply Voltage | 3.3V |
| Terminal Pitch | 2.54mm |
| Base Part Number | 74AHC574 |
| Function | Standard |
| Output Voltage | 5.5V |
| Output Type | Tri-State, Non-Inverted |
| Number of Elements | 1 |
| Polarity | Non-Inverting |
| Supply Voltage-Min (Vsup) | 2V |
| Number of Circuits | 8 |
| Load Capacitance | 50pF |
| Number of Ports | 2 |
| Output Current | 8mA |
| Number of Bits | 8 |
| Clock Frequency | 115MHz |
| Propagation Delay | 16.7 ns |
| Turn On Delay Time | 1 ns |
| Family | AHC/VHC/H/U/V |
| Logic Function | D-Type, Flip-Flop |
| Current - Quiescent (Iq) | 4μA |
| Current - Output High, Low | 8mA 8mA |
| Max Propagation Delay @ V, Max CL | 10.6ns @ 5V, 50pF |
| Trigger Type | Positive Edge |
| Input Capacitance | 3pF |
| Power Supply Current-Max (ICC) | 0.04mA |
| Number of Input Lines | 3 |
| Count Direction | UNIDIRECTIONAL |
| Clock Edge Trigger Type | Positive Edge |
| Max Frequency@Nom-Sup | 75000000Hz |
| Height | 5.08mm |
| Length | 24.33mm |
| Width | 6.35mm |
SN74AHC574N Overview
20-DIP (0.300, 7.62mm)is the packaging method. It is included in the package Tube. Currently, the output is configured to use Tri-State, Non-Inverted. It is configured with a trigger that uses a value of Positive Edge. Through Holeis occupied by this electronic component. The JK flip flop operates at a voltage of 2V~5.5V. In the operating environment, the temperature is -40°C~85°C TA. D-Typeis the type of this D latch. It belongs to the 74AHCseries of FPGAs. Its output frequency should not exceed 115MHz Hz. In total, it contains 1 elements. During its operation, it consumes 4μA quiescent energy. It has been determined that there have been 20 terminations. The object belongs to the 74AHC574 family. It is powered by a voltage of 3.3V . This JK flip flop has a 3pFfarad input capacitance. This D flip flop belongs to the family of AHC/VHC/H/U/V. The electronic part is mounted in the way of Through Hole. This board is designed with 20pins on it. This device exhibits a clock edge trigger type of Positive Edge. This part is included in FF/Latches. This flip flop is designed with 8 Bits. Normally, the supply voltage (Vsup) should be kept above 2V. Using 8 circuits, it is highly flexible. There are 2 ports embedded in the flip flops. This T flip flop features a maximum design flexibility due to its output current of 8mA. This input has 3lines.
SN74AHC574N Features
Tube package
74AHC series
20 pins
8 Bits
SN74AHC574N Applications
There are a lot of Texas Instruments SN74AHC574N Flip Flops applications.
- Storage registers
- Latch
- Supports Live Insertion
- Divide a clock signal by 2 or 4
- Single Up Count-Control Line
- Frequency Divider circuits
- Bus hold
- Latch-up performance
- ATE
- Communications