SN74AC574PWRG4
| Parameters | |
|---|---|
| Factory Lead Time | 6 Weeks |
| Lifecycle Status | ACTIVE (Last Updated: 4 days ago) |
| Mount | Surface Mount |
| Mounting Type | Surface Mount |
| Package / Case | 20-TSSOP (0.173, 4.40mm Width) |
| Number of Pins | 20 |
| Weight | 76.997305mg |
| Operating Temperature | -40°C~85°C TA |
| Packaging | Tape & Reel (TR) |
| Series | 74AC |
| JESD-609 Code | e4 |
| Pbfree Code | yes |
| Part Status | Active |
| Moisture Sensitivity Level (MSL) | 1 (Unlimited) |
| Number of Terminations | 20 |
| ECCN Code | EAR99 |
| Type | D-Type |
| Terminal Finish | Nickel/Palladium/Gold (Ni/Pd/Au) |
| Subcategory | FF/Latches |
| Packing Method | TR |
| Technology | CMOS |
| Voltage - Supply | 2V~6V |
| Terminal Position | DUAL |
| Terminal Form | GULL WING |
| Peak Reflow Temperature (Cel) | 260 |
| Supply Voltage | 3.3V |
| Terminal Pitch | 0.65mm |
| Base Part Number | 74AC574 |
| Function | Standard |
| Output Type | Tri-State, Non-Inverted |
| Number of Elements | 1 |
| Polarity | Non-Inverting |
| Supply Voltage-Max (Vsup) | 6V |
| Supply Voltage-Min (Vsup) | 2V |
| Number of Circuits | 8 |
| Load Capacitance | 50pF |
| Number of Ports | 2 |
| Output Current | 24mA |
| Number of Bits | 8 |
| Clock Frequency | 153MHz |
| Propagation Delay | 13.5 ns |
| Turn On Delay Time | 6 ns |
| Family | AC |
| Logic Function | D-Type, Flip-Flop |
| Current - Quiescent (Iq) | 4μA |
| Current - Output High, Low | 24mA 24mA |
| Max I(ol) | 0.024 A |
| Max Propagation Delay @ V, Max CL | 9.5ns @ 5V, 50pF |
| Trigger Type | Positive Edge |
| Input Capacitance | 4.5pF |
| Power Supply Current-Max (ICC) | 0.04mA |
| Number of Input Lines | 3 |
| Count Direction | UNIDIRECTIONAL |
| Clock Edge Trigger Type | Positive Edge |
| Max Frequency@Nom-Sup | 60000000Hz |
| Height | 1.2mm |
| Length | 6.5mm |
| Width | 4.4mm |
| Thickness | 1mm |
| Radiation Hardening | No |
| RoHS Status | ROHS3 Compliant |
| Lead Free | Lead Free |
SN74AC574PWRG4 Overview
The flip flop is packaged in 20-TSSOP (0.173, 4.40mm Width). A package named Tape & Reel (TR)includes it. As configured, the output uses Tri-State, Non-Inverted. It is configured with a trigger that uses Positive Edge. This electronic part is mounted in the way of Surface Mount. Powered by a 2V~6Vvolt supply, it operates as follows. It is operating at -40°C~85°C TA. There is D-Type type of electronic flip flop associated with this device. In FPGA terms, D flip flop is a type of 74ACseries FPGA. There should be no greater frequency than 153MHzon its output. A total of 1 elements are present. There is 4μA quiescent consumption. A total of 20 terminations have been made. You can search similar parts based on 74AC574. It is powered from a supply voltage of 3.3V. A 4.5pFfarad input capacitance is provided by this T flip flop. Devices in the ACfamily are electronic devices. In this case, the electronic component is mounted in the way of Surface Mount. A total of 20pins are provided on this board. In this device, the clock edge trigger type is Positive Edge. This device has the base part number FF/Latches. An electronic part designed with 8bits is used in this application. The maximal supply voltage (Vsup) reaches 6V. Normally, the supply voltage (Vsup) should be kept above 2V. Using 8 circuits, it is highly flexible. This D flip flop is well suited for TR based on its reliable performance. The flip flop contains 2ports. As a result of its output current of 24mA, it is very flexible in terms of design. A total of 3input lines have been provided.
SN74AC574PWRG4 Features
Tape & Reel (TR) package
74AC series
20 pins
8 Bits
SN74AC574PWRG4 Applications
There are a lot of Texas Instruments SN74AC574PWRG4 Flip Flops applications.
- Common Clocks
- Reduced system switching noise
- Memory
- Event Detectors
- Data storage
- Computing
- Convert a momentary switch to a toggle switch
- Frequency Dividers
- Functionally equivalent to the MC10/100EL29
- Shift registers