SN74AC563DW
| Parameters | |
|---|---|
| Factory Lead Time | 6 Weeks |
| Lifecycle Status | ACTIVE (Last Updated: 4 days ago) |
| Mount | Surface Mount |
| Mounting Type | Surface Mount |
| Package / Case | 20-SOIC (0.295, 7.50mm Width) |
| Number of Pins | 20 |
| Weight | 500.709277mg |
| Operating Temperature | -40°C~85°C |
| Packaging | Tube |
| Series | 74AC |
| JESD-609 Code | e4 |
| Pbfree Code | yes |
| Part Status | Active |
| Moisture Sensitivity Level (MSL) | 1 (Unlimited) |
| Number of Terminations | 20 |
| ECCN Code | EAR99 |
| Terminal Finish | Nickel/Palladium/Gold (Ni/Pd/Au) |
| Subcategory | FF/Latches |
| Technology | CMOS |
| Voltage - Supply | 2V~6V |
| Terminal Position | DUAL |
| Terminal Form | GULL WING |
| Peak Reflow Temperature (Cel) | 260 |
| Number of Functions | 1 |
| Supply Voltage | 3.3V |
| Base Part Number | 74AC563 |
| Pin Count | 20 |
| Output Type | Tri-State |
| Circuit | 8:8 |
| Polarity | Inverting |
| Supply Voltage-Max (Vsup) | 6V |
| Supply Voltage-Min (Vsup) | 2V |
| Load Capacitance | 50pF |
| Number of Ports | 2 |
| Output Current | 24mA |
| Number of Bits | 8 |
| Propagation Delay | 10 ns |
| Turn On Delay Time | 4.6 ns |
| Family | AC |
| Logic Function | D-Type, Latch |
| Current - Output High, Low | 24mA 24mA |
| Logic Type | D-Type Transparent Latch |
| Max I(ol) | 0.024 A |
| Control Type | ENABLE LOW/HIGH |
| Number of Input Lines | 3 |
| Independent Circuits | 1 |
| Count Direction | UNIDIRECTIONAL |
| Translation | N/A |
| Height | 2.65mm |
| Length | 12.8mm |
| Width | 7.5mm |
| Thickness | 2.35mm |
| Radiation Hardening | No |
| REACH SVHC | No SVHC |
| RoHS Status | ROHS3 Compliant |
| Lead Free | Lead Free |
SN74AC563DW Overview
The package in which it is embedded is named 20-SOIC (0.295, 7.50mm Width). As a result, it has a packaging of Tube. There is a Tri-State output configured. The Logic type of this electrical device is D-Type Transparent Latch. A Surface Mount mount is used for mounting this electronic part. There is no supply voltage for this device. A temperature of -40°C~85°C is set as the operating temperature. The 74AC series is associated with this FPGA. With this electronic part, there are 8 bits. The device consists of 20 terminations that are designed to be used in conjunction with it. This type belongs to the 74AC563 family. The device works with a voltage of 3.3V for its supply voltage. There are 20 pins on it. There is a device in this electronic family called AC. The device has 20 pins. Surface Mount is the method used for mounting this electronic part. This device has a total of 2 ports. This part can be found within the FF/Latches subcategory. It reaches 6V when the supply voltage (Vsup) reaches maximum. The supply voltage (Vsup) should be greater than 2V. An electronic circuit can be found on 3 input lines. The output current of 24mA makes it feature maximum design flexibility.
SN74AC563DW Features
20-SOIC (0.295, 7.50mm Width) package
74AC series
8 Bits
74AC563 family
20 pin count
20 pins
SN74AC563DW Applications
There are a lot of Texas Instruments SN74AC563DW Latches applications.
- Parallel-to-Serial Data Conversion
- Sample and hold register
- Timers
- Serial Output Data Queuing
- Serial Output Register
- Parallel data synchronization
- Registers
- Four-bit storage with output enable
- Buffer register
- Synchronous frequency dividers