SN74164N
| Parameters | |
|---|---|
| Mount | Through Hole |
| Package / Case | PDIP |
| Number of Pins | 14 |
| Pbfree Code | no |
| Number of Terminations | 14 |
| Max Operating Temperature | 70°C |
| Min Operating Temperature | 0°C |
| Additional Feature | GATED SERIAL INPUTS (A AND B) |
| Technology | TTL |
| Terminal Position | DUAL |
| Peak Reflow Temperature (Cel) | NOT SPECIFIED |
| Number of Functions | 1 |
| Supply Voltage | 5V |
| Terminal Pitch | 2.54mm |
| Reach Compliance Code | not_compliant |
| Time@Peak Reflow Temperature-Max (s) | NOT SPECIFIED |
| Pin Count | 14 |
| Qualification Status | Not Qualified |
| Operating Supply Voltage | 5V |
| Power Supplies | 5V |
| Temperature Grade | COMMERCIAL |
| Max Supply Voltage | 5.25V |
| Min Supply Voltage | 4.75V |
| Load Capacitance | 15pF |
| Number of Bits | 8 |
| Family | TTL/H/L |
| Logic Function | Shift Register |
| Output Polarity | TRUE |
| Logic IC Type | SERIAL IN PARALLEL OUT |
| Trigger Type | POSITIVE EDGE |
| Propagation Delay (tpd) | 37 ns |
| Power Supply Current-Max (ICC) | 54mA |
| fmax-Min | 25 MHz |
| Count Direction | RIGHT |
| Max Frequency@Nom-Sup | 25000000Hz |
| Height Seated (Max) | 5.08mm |
| Length | 19.305mm |
| Width | 7.62mm |
| RoHS Status | Non-RoHS Compliant |
| Lead Free | Contains Lead |
SN74164N Overview
PDIP is the package in which the device is embedded. 14 is the sum of the number of terminations in the chip. The part's operating supply voltage is rated 5V. Devices with 14 pins are available. It is recommended to mount by Through Hole in order to get the best results. Electronic components fall under the category of TTL/H/L. According to the specification, this chip's operating supply voltage falls within the range of 5V. Additional aspects of this section include: GATED SERIAL INPUTS (A AND B). A device capable of delivering voltage at 5V can be used. A total of 8 bits are present on an IC chip. The pin count is 14. Using it below 70°C is recommended. Ideally, it should not fall below 0°C. Under 5.25V, this voltage is employed. There is a voltage applied to the supply that is greater than 4.75V.
SN74164N Features
With 14 pins
Operate supply voltage at 5V
It supplies 5V power
SN74164N Applications
There are a lot of Texas Instruments SN74164N Shift Registers applications.
- Data Format Converters
- ROM Chips
- Pattern Recognizers
- Pseudo Random Pattern Generator
- Serial-to-parallel data conversion
- Cache memory in CPU
- store data in digital form
- Flash Memory
- Serial to parallel converter
- Sequence generator