SN54HC595J
| Parameters | |
|---|---|
| Turn On Delay Time | 300 ns |
| Family | HC/UH |
| Logic Function | Shift Register |
| Direction | Unidirectional |
| Output Characteristics | 3-STATE |
| Output Polarity | TRUE |
| Logic IC Type | SERIAL IN PARALLEL OUT |
| Prop. Delay@Nom-Sup | 34 ns |
| Trigger Type | POSITIVE EDGE |
| Schmitt Trigger | No |
| fmax-Min | 25 MHz |
| Height | 5.08mm |
| Length | 19.56mm |
| Width | 6.92mm |
| Thickness | 4.57mm |
| Radiation Hardening | No |
| RoHS Status | RoHS Compliant |
| Lead Free | Contains Lead |
| Lifecycle Status | ACTIVE (Last Updated: 1 week ago) |
| Mount | Through Hole |
| Package / Case | CDIP |
| Number of Pins | 16 |
| Number of Terminations | 16 |
| ECCN Code | EAR99 |
| Max Operating Temperature | 125°C |
| Min Operating Temperature | -55°C |
| Additional Feature | PARALLEL OUTPUT IS REGISTERED; UNREGISTERED SERIAL SHIFT RIGHT OUTPUT |
| Packing Method | TUBE |
| Technology | CMOS |
| Terminal Position | DUAL |
| Number of Functions | 1 |
| Supply Voltage | 5V |
| Terminal Pitch | 2.54mm |
| Pin Count | 16 |
| Operating Supply Voltage | 5V |
| Number of Elements | 1 |
| Temperature Grade | MILITARY |
| Max Supply Voltage | 6V |
| Min Supply Voltage | 2V |
| Load Capacitance | 50pF |
| Number of Bits | 8 |
| Propagation Delay | 300 ns |
SN54HC595J Overview
Embedded in a package of type CDIP, the device is available for use. 16 is the sum of the number of terminations in the chip. This part has an operating supply voltage of 5V. A total of 1 elements can be found on this part. There are 16 pins on the device. Through Hole is recommended for mounting. There is an electronic component in the HC/UH. In terms of supply voltage, this chip operates within the range of 5V. The following additional aspects of this section are worth noting: PARALLEL OUTPUT IS REGISTERED; UNREGISTERED SERIAL SHIFT RIGHT OUTPUT. It has 8 bits in total. 16 pins are present on it. It should be used below 125°C. It should not be lower than -55°C to operate this device. It is employed under the condition of 6V. It is used at a voltage greater than 2V. Packaging is in the form of TUBE.
SN54HC595J Features
With 16 pins
Operate supply voltage at 5V
Packing Method : TUBE
SN54HC595J Applications
There are a lot of Texas Instruments SN54HC595J Shift Registers applications.
- Remote control holding register
- Generate time delay toward digital circuits
- Output expansion
- Parallel to serial converter
- Delay Line
- Cache memory in CPU
- Parallel data
- 7-segment display control
- Sequence generator
- Pulse Extenders