SM31RLQD
| Parameters | |
|---|---|
| Mount | Through Hole |
| Number of Pins | 4 |
| Housing Material | Polyester |
| Operating Temperature | -20°C~70°C |
| Published | 1998 |
| Series | MINI-BEAM® |
| Part Status | Active |
| Moisture Sensitivity Level (MSL) | 1 (Unlimited) |
| Voltage - Supply | 10V~30V |
| Ingress Protection | NEMA 1, 2, 3, 3S, 4, 4X, 6, 12, IEC IP67 |
| Output Configuration | NPN/PNP - Dark-ON/Light-ON |
| Output Current | 150mA |
| Response Time | 1ms |
| Adjustment Type | Adjustable, Potentiometer |
| Sensing Distance | 98.43' (30m) |
| Sensing Method | Through-Beam |
| Max Supply Voltage (DC) | 30V |
| Connection Method | Connector |
| Light Source | Infrared LED |
| Min Supply Voltage (DC) | 10V |
| REACH SVHC | No SVHC |
| RoHS Status | ROHS3 Compliant |
| Ratings | IP67 |
SM31RLQD Overview
In order to work reliably, the photoelectric sensor should be set to -20°C~70°C. Into a circuit or system, these electronic components must be given 10V~30V voltage. For photoelectric sensors, a response time of 1ms is considered optimal. The photoelectric sensor must have the 4 pins connected to work properly. In order to operate, photoelectric sensor should have a current of 150mA at the output. There is no damage to the photoelectric sensor when applied a voltage of 30V in a DC circuit. Photoelectric sensors have the capability of operating at very low voltages, such as 10V.
SM31RLQD Features
Sensing Distance: 98.43' (30m)
4 pins
Response Time: 1ms
Operating Temperature: -20°C~70°C
MINI-BEAM? Series
Maximal Supply Voltage (DC): 30V
Minimal Supply Voltage (DC): 10V
SM31RLQD Applications
There are a lot of Banner Engineering Corporation SM31RLQD Photoelectric Sensors applications.
- Logistics and materials handling
- Mechanical engineering
- Pharmaceutical industry
- Counting small objects
- Entrance and gate
- Zone scanners
- Passive infrared sensors
- Checking objects on production lines or conveyors
- Material handling
- Monitoring bigger areas for objects with light grids