SCD15PSN
| Parameters | |
|---|---|
| Package / Case | Module |
| Operating Temperature | -10°C~75°C |
| Packaging | Bulk |
| Published | 2009 |
| Series | SCD |
| Part Status | Obsolete |
| Moisture Sensitivity Level (MSL) | Not Applicable |
| Max Operating Temperature | 75°C |
| Min Operating Temperature | -10°C |
| Voltage - Supply | 12V |
| Current Rating | 15A |
| Frequency | 50Hz/60Hz |
| Output | Ratiometric, Voltage |
| Current - Supply (Max) | 25mA |
| Output Voltage | 5V |
| Polarity | Unidirectional |
| Number of Channels | 1 |
| Polarization | Unidirectional |
| Max Supply Current | 25mA |
| Response Time | 3μs |
| Sensor Type | Hall Effect, Open Loop |
| Linearity | ±0.5% |
| For Measuring | DC |
| Current - Sensing | 15A |
| Height | 20mm |
| Width | 15mm |
| RoHS Status | RoHS Compliant |
| Lead Free | Lead Free |
SCD15PSN Overview
For safety purposes, the current sensors are housed in Module packages. A Bulk is used to protect the current sensors against damage. The maximum current supplied by these current sensors should be 25mA. Current sensors should not supply a current greater than 25mA. The operating temperature must not be lower than -10°C to ensure these current sensors work. Nevertheless, the current sensors should be set to 75°C as the maximum operating temperature. In this case, the current sensors have been designed for a current of 15A. Voltage output by current sensors should be 5V.
SCD15PSN Features
Moisture Sensitivity Level: Not Applicable
Operating Temperature: -10°C~75°C
1 Channels
Sensor Type: Hall Effect, Open Loop
Supply Voltage: 12V
Frequency: 50Hz/60Hz
Sensing Current: 15A
Module Package
SCD15PSN Applications
There are a lot of CUI Devices SCD15PSN Current Sensors applications.
- Monitor Motor Operation
- Power supplies for welding applications
- DC and AC power monitoring
- Home Automation
- Switched Mode Power Supplies (SMPS)
- Power supply management
- AC variabel speed drives and servo motor drives
- Proving Switch
- Inverter and H-bridge current measurements
- Industrial Monitoring and Control Systems