SC16C751BIBS,157
| Parameters | |
|---|---|
| Mounting Type | Surface Mount |
| Package / Case | 24-VFQFN Exposed Pad |
| Surface Mount | YES |
| Packaging | Tray |
| Published | 2008 |
| JESD-609 Code | e4 |
| Part Status | Obsolete |
| Moisture Sensitivity Level (MSL) | 1 (Unlimited) |
| Number of Terminations | 32 |
| Terminal Finish | Nickel/Palladium/Gold (Ni/Pd/Au) |
| Additional Feature | ALSO OPERATES AT 2.5V SUPPLY |
| HTS Code | 8542.31.00.01 |
| Subcategory | Serial IO/Communication Controllers |
| Technology | CMOS |
| Voltage - Supply | 2.5V 3.3V 5V |
| Terminal Position | QUAD |
| Terminal Form | NO LEAD |
| Peak Reflow Temperature (Cel) | 260 |
| Supply Voltage | 3.3V |
| Terminal Pitch | 0.5mm |
| Reach Compliance Code | unknown |
| Time@Peak Reflow Temperature-Max (s) | 30 |
| Base Part Number | SC16C751 |
| Pin Count | 24 |
| JESD-30 Code | S-PQCC-N32 |
| Qualification Status | Not Qualified |
| Operating Temperature (Max) | 85°C |
| Operating Temperature (Min) | -40°C |
| Power Supplies | 2.5/5V |
| Temperature Grade | INDUSTRIAL |
| Number of Channels | 1, UART |
| uPs/uCs/Peripheral ICs Type | SERIAL IO/COMMUNICATION CONTROLLER, SERIAL |
| Clock Frequency | 80MHz |
| Address Bus Width | 3 |
| Boundary Scan | NO |
| Low Power Mode | YES |
| External Data Bus Width | 8 |
| Data Rate (Max) | 5Mbps |
| Number of Serial I/Os | 2 |
| Data Transfer Rate-Max | 0.625 MBps |
| Communication Protocol | ASYNC, BIT |
| FIFO's | 64 Byte |
| With Modem Control | Yes |
| Height Seated (Max) | 1mm |
| Length | 5mm |
| Width | 5mm |
| RoHS Status | ROHS3 Compliant |
SC16C751BIBS,157 Overview
The 24-VFQFN Exposed Pad package is the most cost-effective.UART is possible to transmUART on 1, UART channels.For packaging purposes, Tray is used.The type SERIAL IO/COMMUNICATION CONTROLLER, SERIAL is used to identify the uPs/uCs/Peripheral ICs on the board.In order to configure this device, 32 terminations are used.For its operation, it requires a supply voltage of 3.3V.At present, this electronic part has a status of Obsolete.Data communication is supported by 2 serial I/Os.Mounting is done through Surface Mount.UART operates wUARTh the supply voltage of 2.5V 3.3V 5V.An 24-pin integrated circuit is what this particular device is.IC clock frequency is set to 80MHz.In light of numerous similarities, it is included in the subcategory of Serial IO/Communication Controllers.UART can operate at a maximum temperature of 85°C.UART is reliable and efficient for electronic designers to use when power supplies of 2.5/5V are provided.Furthermore, it has the ability to perform ALSO OPERATES AT 2.5V SUPPLY as well.As a base part number, it is specified as SC16C751.In order to operate, the device must be kept at a minimum temperature of -40°C.
SC16C751BIBS,157 Features
2 serial I/Os
Clock frequency of 80MHz
Power supplies of 2.5/5V
ALSO OPERATES AT 2.5V SUPPLY
SC16C751BIBS,157 Applications
There are a lot of NXP USA Inc. SC16C751BIBS,157 UARTs applications.
- Factory Automation and Process Controls
- Wireless Infrared Data Communications Systems
- Factory automation and process control
- Portable Appliances
- Point-of-Sale Systems
- Portable and battery operated devices
- Cellular Phones DataPort
- Router C ontrol
- Remote Access Servers
- White goods