S18SP6R
| Parameters | |
|---|---|
| Number of Pins | 4 |
| Operating Temperature | -40°C~70°C |
| Published | 2006 |
| Series | S18 |
| Part Status | Active |
| Moisture Sensitivity Level (MSL) | 1 (Unlimited) |
| Voltage - Supply | 10V~30V |
| Ingress Protection | NEMA 6P, IEC IP67, IEC IP69K |
| Approval Agency | CE, CSA, UL |
| Output Configuration | PNP - Dark-ON/Light-ON |
| Cable Length | 78.74 2m |
| Output Current | 150mA |
| Contact Current Rating | 150mA |
| Response Time | 3ms |
| Sensing Distance | 787.402 (20m) |
| Sensing Method | Through-Beam |
| Max Supply Voltage (DC) | 30V |
| Connection Method | Cable |
| Light Source | Infrared (950nm) |
| Min Supply Voltage (DC) | 10V |
| Length | 59.2mm |
| REACH SVHC | No SVHC |
| RoHS Status | ROHS3 Compliant |
| Ratings | IP67 |
S18SP6R Overview
To make sure the photoelectric sensor works, set its temperature to zero. Electronic components require a voltage of 10V~30V to function in a circuit or system. Photoelectric sensors should have a response time of 3ms. It's important to connect 4 pins for the photoelectric sensor to work. Photoelectric sensors must operate with an output current of 150mA. A photoelectric sensor can withstand a voltage of 30V in a DC circuit without being damaged. The photoelectric sensor can operate at an extremely low voltage, such as 0 volts.
S18SP6R Features
Sensing Distance: 787.402 (20m)
4 pins
Response Time: 3ms
Operating Temperature: -40°C~70°C
S18 Series
Maximal Supply Voltage (DC): 30V
Minimal Supply Voltage (DC): 10V
S18SP6R Applications
There are a lot of Banner Engineering Corporation S18SP6R Photoelectric Sensors applications.
- Material handling
- Checking objects on production lines or conveyors
- Entrance and gate
- Pharmaceutical industry
- Automatic doors
- Logistics and materials handling
- Contrast sensors
- Detecting colours
- Counting small objects
- Zone scanners