S18SP6FF50Q
| Parameters | |
|---|---|
| Number of Pins | 4 |
| Operating Temperature | -40°C~70°C |
| Published | 2006 |
| Series | S18 |
| Part Status | Active |
| Moisture Sensitivity Level (MSL) | 1 (Unlimited) |
| Voltage - Supply | 10V~30V |
| Ingress Protection | NEMA 6P, IEC IP69K |
| Output Configuration | PNP - Dark-ON/Light-ON |
| Output Current | 150mA |
| Throw Configuration | SPDT |
| Response Time | 3ms |
| Sensing Distance | 1.969 (50mm) |
| Sensing Method | Background Suppression |
| Max Supply Voltage (DC) | 30V |
| Connection Method | Connector |
| Light Source | Infrared LED |
| Min Supply Voltage (DC) | 10V |
| REACH SVHC | No SVHC |
| RoHS Status | ROHS3 Compliant |
| Ratings | IP69K |
S18SP6FF50Q Overview
In order to work reliably, the photoelectric sensor should be set to -40°C~70°C. For these electronic components to work, the voltage should be provided by 10V~30V. For photoelectric sensors, a response time of 3ms is considered optimal. In order to make the photoelectric sensor work properly, it must have 4 pins connected. A photoelectric sensor must have a current at the output of 150mA in order to function. DC circuit can apply a maximum voltage of 30V without harming the photoelectric sensor. As low a voltage as possible, such as 10V, can be used for this photoelectric sensor.
S18SP6FF50Q Features
Sensing Distance: 1.969 (50mm)
4 pins
Response Time: 3ms
Operating Temperature: -40°C~70°C
S18 Series
Maximal Supply Voltage (DC): 30V
Minimal Supply Voltage (DC): 10V
S18SP6FF50Q Applications
There are a lot of Banner Engineering Corporation S18SP6FF50Q Photoelectric Sensors applications.
- Measuring distance
- Counting small objects
- Passive infrared sensors
- Mechanical engineering
- Monitoring bigger areas for objects with light grids
- Luminescence sensors
- Contrast sensors
- Material handling
- detect objects
- Entrance and gate