RNE0E681MDN1
| Parameters | |
|---|---|
| Mount | Through Hole |
| Package / Case | Radial |
| Dielectric Material | ALUMINUM |
| Tolerance | 20% |
| JESD-609 Code | e3 |
| Pbfree Code | yes |
| Number of Terminations | 2 |
| ECCN Code | EAR99 |
| Terminal Finish | Tin (Sn) |
| Max Operating Temperature | 105°C |
| Min Operating Temperature | -55°C |
| Voltage - Rated | 2.5V |
| HTS Code | 8532.22.00 |
| Capacitance | 680μF |
| Packing Method | Box |
| Terminal Pitch | 3.5mm |
| Lead Pitch | 3.5052mm |
| Capacitor Type | ALUMINUM ELECTROLYTIC CAPACITOR |
| ESR (Equivalent Series Resistance) | 8mOhm |
| Polarity | Polar |
| Ripple Current | 4.9A |
| Life (Hours) | 2000 hours |
| Diameter | 8mm |
| Height Seated (Max) | 7.0104mm |
| Length | 6mm |
| RoHS Status | RoHS Compliant |
The capacitance can run at the range of 680μF.
20% are used to determine the tolerance of this capacitor. It is contained in a package of Radial. The type of the RNE0E681MDN1 capacitor Nichicon RNE0E681MDN1 is suitable to conduct the ripple current at 4.9A. RNE0E681MDN1 Capacitor is mounted by Through Hole. There are 2 terminals embeded in RNE0E681MDN1 Capacitor. Voltage - Rated often has values of 2.5V. The part is packaged by Box. The dielectric materials are defined as ALUMINUM. This device's minimum working temperature must not be less than -55°C. It's recommended that you utilize it when the temperature is below 105°C. The capacitor type can be sorted using ALUMINUM ELECTROLYTIC CAPACITOR.
Series
Capacitance: 680μF
Tolerance: 20%
Package / Case: Radial
There are great quantities of applications of RNE0E681MDN1 Aluminum Polymer Capacitors.
Typically, RNE0E681MDN1 is used to smooth and buffer rectified DC voltages for DC-DC converters and Power supplies, to reduce power noise & signal noise and to enhance power efficiency. And the following shows some of them.
- PFC
- UPS Buffering
- Computer motherboards
- Frequency Converters
- To reduce power noise & signal noise
- Spot Welding
- Smoothing Noise Filtering
- Lighting Ballast
- Coupling or blocking
- Server motherboards