QS30R
| Parameters | |
|---|---|
| Number of Pins | 5 |
| Housing Material | ABS |
| Operating Temperature | -20°C~70°C |
| Published | 2005 |
| Series | QS30 |
| Part Status | Active |
| Moisture Sensitivity Level (MSL) | 1 (Unlimited) |
| Voltage - Supply | 10V~30V |
| Ingress Protection | NEMA 6P, IP67 |
| Output Configuration | NPN/PNP - Dark-ON/Light-ON |
| Cable Length | 78.74 2m |
| Output Current | 100mA |
| Response Time | 5ms |
| Sensing Distance | 196.85' (60m) |
| Sensing Method | Through-Beam |
| Max Supply Voltage (DC) | 30V |
| Connection Method | Cable |
| Light Source | Infrared LED |
| Min Supply Voltage (DC) | 10V |
| REACH SVHC | No SVHC |
| RoHS Status | ROHS3 Compliant |
| Ratings | IP67 |
QS30R Overview
For reliable performance, set the photoelectric sensor's temperature to zero. In order for these electronic components to work, their voltage must be set to 10V~30V. A photoelectric sensor with a response time of 5ms is considered to be ideal. To make the photoelectric sensor work, you have to connect the 5 pins. In order to operate, photoelectric sensor should have a current of 100mA at the output. It is possible to apply a voltage of 30V to the photoelectric sensor in a DC circuit without causing damage. As low a voltage as possible can be applied to this photoelectric sensor, such as 10V.
QS30R Features
Sensing Distance: 196.85' (60m)
5 pins
Response Time: 5ms
Operating Temperature: -20°C~70°C
QS30 Series
Maximal Supply Voltage (DC): 30V
Minimal Supply Voltage (DC): 10V
QS30R Applications
There are a lot of Banner Engineering Corporation QS30R Photoelectric Sensors applications.
- Zone scanners
- Pharmaceutical industry
- detect objects
- Mechanical engineering
- Monitoring bigger areas for objects with light grids
- Automatic doors
- Passive infrared sensors
- Luminescence sensors
- Logistics and materials handling
- Checking objects on production lines or conveyors