QS30LP
| Parameters | |
|---|---|
| Number of Pins | 5 |
| Housing Material | ABS |
| Operating Temperature | -20°C~70°C |
| Published | 2005 |
| Series | QS30 |
| Part Status | Active |
| Moisture Sensitivity Level (MSL) | 1 (Unlimited) |
| Voltage - Supply | 10V~30V |
| Ingress Protection | NEMA 6P, IP67 |
| Output Configuration | NPN/PNP - Dark-ON/Light-ON |
| Cable Length | 78.74 2m |
| Output Current | 100mA |
| Response Time | 2ms |
| Adjustment Type | Adjustable, Potentiometer |
| Sensing Distance | 314.961 (8m) |
| Sensing Method | Retroreflective, Polarized |
| Max Supply Voltage (DC) | 30V |
| Connection Method | Cable |
| Light Source | Red (630nm) |
| Min Supply Voltage (DC) | 10V |
| REACH SVHC | No SVHC |
| RoHS Status | ROHS3 Compliant |
| Ratings | IP67 |
QS30LP Overview
The temperature of photoelectric sensor should be set to -20°C~70°C to ensure reliable performance. In order for these electronic components to work, they should be given 10V~30V voltage. It is considered ideal for photoelectric sensors to have a response time of 0. You've got to connect the 5 pins to the photoelectric sensor for it to work. Photoelectric sensors are designed to operate with a current of 100mA at the output. A photoelectric sensor can withstand a voltage of 30V in a DC circuit without being damaged. A photoelectric sensor such as this can operate at a voltage as low as possible, such as 0 volts.
QS30LP Features
Sensing Distance: 314.961 (8m)
5 pins
Response Time: 2ms
Operating Temperature: -20°C~70°C
QS30 Series
Maximal Supply Voltage (DC): 30V
Minimal Supply Voltage (DC): 10V
QS30LP Applications
There are a lot of Banner Engineering Corporation QS30LP Photoelectric Sensors applications.
- Contrast sensors
- Automatic doors
- Mechanical engineering
- Counting small objects
- Monitoring bigger areas for objects with light grids
- Measuring distance
- Entrance and gate
- Passive infrared sensors
- Logistics and materials handling
- Luminescence sensors