Q45BB6DLQ5
| Parameters | |
|---|---|
| Number of Pins | 4 |
| Housing Material | Polyester |
| Body Material | Polyester, Thermoplastic |
| Operating Temperature | -40°C~70°C |
| Published | 2001 |
| Series | Q45 |
| Part Status | Active |
| Moisture Sensitivity Level (MSL) | 1 (Unlimited) |
| Voltage - Supply | 10V~30V |
| Ingress Protection | NEMA 6P, IEC IP67 |
| Output Configuration | NPN/PNP |
| Output Current | 250mA |
| Response Time | 2ms |
| Adjustment Type | Adjustable |
| Sensing Distance | 70.866 (1.8m) |
| Sensing Method | Through-Beam |
| Max Supply Voltage (DC) | 30V |
| Connection Method | Connector |
| Light Source | Infrared (880nm) |
| Min Supply Voltage (DC) | 10V |
| Height | 87.6mm |
| Length | 44.4mm |
| Width | 54.6mm |
| REACH SVHC | No SVHC |
| RoHS Status | ROHS3 Compliant |
| Ratings | IP67 |
Q45BB6DLQ5 Overview
It is recommended that the photoelectric sensor is set at -40°C~70°C to ensure reliable performance. To make these electronic components function, they should receive a voltage of 10V~30V. For photoelectric sensors, 2ms is ideal. This photoelectric sensor can only function properly if the 4 pins are connected. Photoelectric sensors need 250mA at their outputs to work. It is possible to apply a voltage of 30V to the photoelectric sensor in a DC circuit without causing damage. It is possible to operate this photoelectric sensor at a voltage as low as possible, for example at zero volts.
Q45BB6DLQ5 Features
Sensing Distance: 70.866 (1.8m)
4 pins
Response Time: 2ms
Operating Temperature: -40°C~70°C
Q45 Series
Maximal Supply Voltage (DC): 30V
Minimal Supply Voltage (DC): 10V
Q45BB6DLQ5 Applications
There are a lot of Banner Engineering Corporation Q45BB6DLQ5 Photoelectric Sensors applications.
- Logistics and materials handling
- Zone scanners
- Detecting colours
- Pharmaceutical industry
- Contrast sensors
- Material handling
- Luminescence sensors
- Checking objects on production lines or conveyors
- Mechanical engineering
- Entrance and gate