OPF422
| Parameters | |
|---|---|
| Factory Lead Time | 12 Weeks |
| Mount | Panel, Through Hole |
| Mounting Type | Through Hole |
| Package / Case | TO-46-3 |
| Number of Pins | 3 |
| Operating Temperature | -40°C~100°C |
| Packaging | Bulk |
| Published | 1997 |
| Part Status | Active |
| Moisture Sensitivity Level (MSL) | 1 (Unlimited) |
| Max Operating Temperature | 100°C |
| Min Operating Temperature | -40°C |
| Diode Type | PIN |
| Power Dissipation | 200mW |
| Response Time | 20ns |
| Voltage - DC Reverse (Vr) (Max) | 100V |
| Rise Time | 6ns |
| Fall Time (Typ) | 6 ns |
| Max Reverse Voltage (DC) | 100V |
| Reverse Breakdown Voltage | 100V |
| Reverse Voltage | 100V |
| Wavelength | 880nm |
| Dark Current | 100pA |
| Spectral Range | 500nm ~ 1100nm |
| Current - Dark (Typ) | 100pA |
| REACH SVHC | Unknown |
| RoHS Status | RoHS Compliant |
| Lead Free | Lead Free |
OPF422 Overview
The photodiodes are packaged in the Bulk to prevent damage. For safety reasons, the photodiodes are packaged in TO-46-3 packages. Photodiodes can only withstand 100V in reverse-bias mode indefinitely. When reverse-biased, the photodiodes should not continually exceed 100V. Photodiodes have pins 3. There is a possibility that the photodiodes could release 200mW heat within the circuit. In order for photodiodes to function, the temperature must not exceed 100°C. But the minimum operating temperature for the photodiodes should be set to -40°C. ?A reverse anode voltage of 100V should be applied to the photodiodes. In reverse-biased mode, photodiodes could provide 100V. It is possible for a photodiode to produce 100pA even without light input.
OPF422 Features
Moisture Sensitivity Level (MSL): 1 (Unlimited)
Operating Temperature: -40°C~100°C
Packaging: Bulk
Diode Type: PIN
Mount: Panel, Through Hole
Spectral Range: 500nm ~ 1100nm
Response Time: 20ns
OPF422 Applications
There are a lot of TT Electronics/Optek Technology OPF422 Photodiodes applications.
- Shaft encoders
- Solar Cells
- Emitter Alignment
- High speed photo detectors
- Measurement Levelling
- Infrared remote control
- Low Capacitance
- Pure UV-C Monitoring
- Optical Switches
- Currency Validation