OMH3040S
| Parameters | |
|---|---|
| Factory Lead Time | 29 Weeks |
| Mounting Type | Through Hole |
| Package / Case | 3-SSIP |
| Number of Pins | 3 |
| Supplier Device Package | TO-92-3 |
| Operating Temperature | -55°C~125°C TA |
| Packaging | Bulk |
| Published | 2012 |
| Part Status | Active |
| Moisture Sensitivity Level (MSL) | 1 (Unlimited) |
| Max Operating Temperature | 125°C |
| Min Operating Temperature | -55°C |
| Technology | Hall Effect |
| Voltage - Supply | 4.5V~24V |
| Function | Unipolar Switch |
| Current - Supply (Max) | 11mA |
| Output Type | Open Collector |
| Max Output Current | 25mA |
| Operating Supply Voltage | 12V |
| Polarity | South Pole |
| Polarization | South Pole |
| Current - Output (Max) | 25mA |
| Max Supply Current | 11mA |
| Sensing Method | Hall Effect |
| Test Condition | -55°C ~ 125°C |
| Sensing Range | 27mT Trip, 2.5mT Release |
| RoHS Status | Non-RoHS Compliant |
OMH3040S Overview
The magnetic switch is packaged in Bulk to protect it from damage. For safety reasons, magnetic switches are packaged in 3-SSIP packages. Good performance is achieved by powering the magnetic switches with 11mA as the maximum current. In their operating mode, these switches can output a maximum current of 25mA. For magnetic switches, the maximum output current should be 25mA. This switch can supply a maximum of 11mA amps. 3 pins are used to operate the switches. A magnetic switch can be set to 125°C for its maximum operating temperature. For this magnetic switch to function, however, the operating temperature cannot be below -55°C. Magnetic switches operate by supplying 12V voltage.
OMH3040S Features
Packaging: Bulk
Moisture Sensitivity Level (MSL): 1 (Unlimited)
Supply Voltage: 4.5V~24V
Operating Temperature: -55°C~125°C TA
Mounting Type: Through Hole
3 Pins
Output Type: Open Collector
Maximum Supply Current: 11mA
OMH3040S Applications
There are a lot of TT Electronics/Optek Technology OMH3040S Magnetic Switches applications.
- Dyno testing
- Tachometers/counters
- Detection of ferromagnetic
- Clutch/brake position sensor
- Control of magnetic apparatus
- Exercise equipment
- Brushless DC (direct current) motor commutation
- Wiper home/end position sensor
- Counter pickup
- Transmission