OMAPL137DZKBD4
| Parameters | |
|---|---|
| Factory Lead Time | 6 Weeks |
| Lifecycle Status | ACTIVE (Last Updated: 4 days ago) |
| Package / Case | 256-BGA |
| Surface Mount | YES |
| Number of Pins | 256 |
| Operating Temperature | -40°C~90°C TJ |
| Packaging | Tray |
| Series | OMAP-L1x |
| JESD-609 Code | e1 |
| Pbfree Code | yes |
| Part Status | Active |
| Moisture Sensitivity Level (MSL) | 3 (168 Hours) |
| Number of Terminations | 256 |
| Terminal Finish | Tin/Silver/Copper (Sn/Ag/Cu) |
| Subcategory | Other Microprocessor ICs |
| Technology | CMOS |
| Terminal Position | BOTTOM |
| Terminal Form | BALL |
| Peak Reflow Temperature (Cel) | 260 |
| Supply Voltage | 1.3V |
| Frequency | 456MHz |
| Base Part Number | OMAPL137 |
| Operating Supply Voltage | 1.3V |
| Max Supply Voltage | 1.35V |
| Min Supply Voltage | 1.25V |
| uPs/uCs/Peripheral ICs Type | DIGITAL SIGNAL PROCESSOR, OTHER |
| Core Processor | ARM926EJ-S |
| Core Architecture | ARM |
| Boundary Scan | YES |
| Low Power Mode | YES |
| Format | FLOATING POINT |
| Integrated Cache | YES |
| Voltage - I/O | 1.8V 3.3V |
| Number of UART Channels | 3 |
| Ethernet | 10/100Mbps (1) |
| Number of Cores/Bus Width | 1 Core 32-Bit |
| Graphics Acceleration | No |
| RAM Controllers | SDRAM |
| USB | USB 1.1 + PHY (1), USB 2.0 + PHY (1) |
| Additional Interfaces | HPI, I2C, McASP, MMC/SD, SPI, UART |
| Number of Timers | 3 |
| Co-Processors/DSP | Signal Processing; C674x, System Control; CP15 |
| Number of Cores | 1 |
| Barrel Shifter | NO |
| Internal Bus Architecture | SINGLE |
| Display & Interface Controllers | LCD |
| Height | 2.05mm |
| Length | 17mm |
| Width | 17mm |
| Thickness | 1.36mm |
| RoHS Status | ROHS3 Compliant |
| Lead Free | Lead Free |
OMAPL137DZKBD4 Overview
The microprocessor is convenient for international shipping since it is packaged in 256-BGA. High reliability is achieved by using advanced packaging methods Tray. In the CPU, there are 1 Core 32-Bit cores and 1 Core 32-Bit bus width. It is important to understand the operating temperature around -40°C~90°C TJ. OMAP-L1x is its series number. ARM926EJ-S is the processor core of this CPU. A total of SDRAM RAM controllers are used by this CPU. This microprocessor is equipped with an interface of HPI, I2C, McASP, MMC/SD, SPI, UART. In this CPU, I/O is set to 1.8V 3.3V. The type DIGITAL SIGNAL PROCESSOR, OTHER belongs to uPs/uCs/Peripheral ICs. Using OMAPL137 will help you find variants of the cpu microprocessor. There are 256 terminations totally. With a 1.3V voltage supply, the part should be turned on and run. CPUs operate with a frequency of 456MHz Hz. To learn about the functions of the pins 256 please refer to their datasheets. An example of a Other Microprocessor ICs embedded microprocessor. There are 1 cores in this CPU. There is a 1.3V function for the micro processor. normal operation of the microprocessor should not require the device to be powered by a voltage higher than 1.35V. It is recommended that the lowest voltage be fed to the micro processor is 1.25V. A total of 3 UART (Universal Asynchro3us Receiver/Transmitter) channels are available on this embedded microprocessor
OMAPL137DZKBD4 Features
ARM926EJ-S Core
1-Core CPU
OMAPL137DZKBD4 Applications
There are a lot of Texas Instruments OMAPL137DZKBD4 Microprocessor applications.
- Home video and audio
- Vacuum cleaners
- Electromechanical control
- Home appliances
- Volt meter
- Set-top boxes
- Dryers
- Measuring revolving objects
- Magnetic resonance imaging (MRI)
- Traditional industrial transformation